Used on Croft and Keller sliding screen doors. 1/4 in W x 3/8 in Dia flat nylon ball bearing wheel with 3/8 in threaded hex hub. Includes 2 rollers and 2 fasteners.

Consists of 1/4 in W center groove wheel. Heat-treated, high-tension adjustable steel M-spring. Used by several patio door manufacturers.

1/4 in W center groove nylon wheel, high-tension 2-1/2 in L heat-treated steel spring and #8 x 3/8 in Phillips pan head sheet metal screw.

This die-cast keeper or strike is used by many screen door manufacturers. It is 7/32 in wide with a 1/4 in deep projection. It has an downward hook and adjustment slots that allows it to be adjusted up or down to the correct position to engage the latch.

Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat-treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw.

Bent spring design used by Academy Mfg. and others. Center grooved 5/16 in W wheel, 2-1/4 in L x 5/16 in W flat high-tension heat-treated steel spring and #8 x 3/8 in Phillips sheet metal screw.

Plastic roller with narrow center groove 7/32 in W nylon wheel, concave edge. Includes a 8-32 x 3/8 in machine screw with binder post nut. Fits on air control doors.

Non-handed, surface mount, economy pulls, plastic assembly. Contains one black inside pull, one black outside pull, #4 8 x 3/8 in Phillips flat head sheet metal screws. 1-7/8 in W x 4 in H.

Used by several patio door manufacturers. Consists of 1/4 in W center groove wheel, high-tension heat-treated steel v-spring (2 in L before and 2 in L after bend).

Used as top and bottom roller by several patio door manufacturers. Consists of 1/4 in W center groove nylon wheel, 2 in L x 3/8 in W steel housing, high-tension heat-treated steel spring.

Plastic center grooved wheel with steel housing, high-tension steel spring. Fits on Columbia Uni-fit doors. Contents: 2 roller assemblies.

Used as top and bottom roller. Plastic wheel with center groove. 1-7/8 in L housing. Heat-treated, high-tension steel spring and #8-32 x 1-1/4 in Phillips pan head screw.

Used by several door manufacturers for non-handed mortise installations. Sliding activator button designed for Jim Walters sliding roll-formed screen door. Includes black plastic inside pull and latch activator, black plastic outside pull, steel latch and installation screws. 2 in W x 4 in H handles.

Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat-treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw.

Consists of 1/4 in W center groove wheel. Heat-treated, high-tension adjustable steel M-spring. Used by several patio door manufacturers.

Non-handed; mortise installation, used by several door manufacturers. Includes one plastic inside and outside pull, one steel latch assembly, one plastic activator, one pop rivet and installation screws.

Prime-Line Bug Seal, Vinyl, 7 in L, 3/4 to 1-3/8 in W

For sliding glass doors. Center grooved, 5/16 in W steel ball bearing roller and steel inner race with 1/4 in - 20 x 3/4 in carriage bolt and 1/4 in - 20 hex nut.

Flush mount fits into door stile. 1/16 in projection inside/outside of patio door. Reversible for right or left hand application. Packed with 4 different latch hooks to fit virtually all applications. For 1 to 1-1/4 in thick doors. 6-1/2 in distance between attaching screws.

Contents: 2 rollers Steel ball bearing roller, steel inner race with 1/4 in hole, center grooved.

Used by many patio door manufacturers. Steel ball bearing roller in adjustable 2-5/8 in L x 1-3/8 in H x 3/4 in D steel housing with 10-32 machine thread hole on top center and 1/4-20 side threads for mounting.

Used by Air Control, Howmet, Krestmark and many other patio door manufacturers. Steel ball bearing roller and adjustable 2-5/8 in L x 1-3/8 in H x 3/4 in D steel housing assembly with machine threaded holes (10-32 top and 1/4-20 side) for installation.

Steel ball bearing roller and adjustable steel housing assembly. Fits on Nu-Air, Bennings, Scotty and many other patio door manufacturers.

Cylinder Lock, 1-1/4 in, 5-pin tumbler lock with 2 keys, hardened break-away tailpiece. Used to keylock most surface mount handle sets. Keyway is compatible with Weiser, Kwikset & Weslock.

Steel ball bearing roller, adjustable steel housing assembly. Used by many patio door manufacturers. 2-5/8 in L, 1-1/8 in H and 3/4 in W housing dimensions. 10-32 machine thread on top and 1/4-20 machine thread on end of housing.

Black die-cast supports w/wood handle. Mounting posts come finished in black colored paint and the wooden pull handle comes finished in a clear finish. Can be installed on doors with mounting hole centers ranging from 6-1/2 to 6-5/8 in center-2-center. Surface-mounted. Features a sturdy metal backer support behind the wood. Note: Color of wood may vary per shipment.

Wright replacement oak patio door handle can be installed on the interior plate of the V1195 or VK1195 flush-mounted latches to provide a larger pulling surface.

Steel housing and hook, round end face plate. Hook position is adjustable, fits on W&F. Hole center of 3-11/16 in.

Nylon outer housing, aluminum inner housing with center grooved nylon wheel with adjustment cam. Contents: 2 roller assemblies, installation screws.

Fits all popular flush lock punch outs for 1 in thick doors. 3/4 x 2-3/4 in, universal design, die-cast, chrome finish keeper #E-2040 adjusts vertically. Includes 7-1/4 in L x 7/8 in W inside and outside pulls, latch on inside pull, keeper, installation fasteners and 4 assorted hooks (3/8 in, 3/4 in, 1/2 in and 5/8 in). 6-5/8 in installation hole spacing.