Submit search
N 6562 is a 3-Piece adjustable floor guide. Made of white nylon, the guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in thick. Used by many closet door manufacturers. The guides extend 3/4 in from the floor. For taller guides see N 6760 or N 6761.
Plated steel, universal design fits a 3/4 in Dia hole.
N 6567 is a set of 2 white nylon floor guides for a single door that is any thickness. Often used on pocket doors as well as bi-pass door systems. Used by several door manufacturers.
National Hardware Door Cup Pull, Plate Size: 0.02 in, 0.34 in D, 1-3/4 in Dia, Flush Mounting, Steel, Brass, Fastener Type: Nail, Suitable for: 1/4 in and Larger Size Panels, By-Passing, Pocket and Other Sliding Doors, Includes: Nails
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
N 6563 is a white nylon floor guide for 1-3/8 in thick doors. A universal design. At 1-1/8 in tall, it provides a taller than normal guide for most standard thickness closet doors.
N 6796 is a bi-pass floor guide used primarily on Johnson Hardware closet doors. It has a stamped steel floor base with adjusting slots for the nylon guides to fit into. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. If a shim is needed see N 6795 carpet riser to accommodate the height of the carpet.
Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
Fits Cox wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes 3 #8 x 3/4 in Phillips pan head screws.
N 6761 is a 3-Piece adjustable floor guide. Made of white nylon, the 1-1/4 in tall guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in thick. Used by many closet door manufacturers.
N 6706 is a bottom mount pivot used by many bi-fold door manufacturers. The 3/8 in Dia nylon base houses a 1/4 in pivot with a hex head nut for adjustment.
N 6661 is a bi-pass floor guide that can be used universally on most wardrobe doors systems. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. The carpet riser shim plates can raise the guides from 1/8 to 5/8 in above the floor to accommodate the height of the carpet.
N 6560 is a 2-Piece adjustable floor guide. Made of white nylon, the guides can be adjusted to accommodate doors 3/4 to 1-3/8 in thick by using the slots in the stamped steel floor base. Used by many closet door manufacturers. The guides extend 5/8 in from the floor.
N 6841 is an adjustable top hung, side mounted bracket with a 3/8 in offset and 7/8 in flat nylon roller used on the back sliding door panel. It fits 3/4 to 1-3/8 in thick doors.
N 6840 is an adjustable top hung, side mounted bracket with a 1/16 in offset and 7/8 in flat nylon roller used on the front sliding door panel. It fits 3/4 to 1-3/8 in thick doors.
N 6668 is a side mounted, top hung, adjustable wardrobe door roller assembly with a single 7/8 in convex nylon wheel for the back door panel. The stamped steel bracket assembly is adjustable and has a 1/2 in offset. It fits 3/4 to 1-3/8 in thick doors. Used on Atlas closet door systems. For front door panel see N 6667.
National Hardware Door Pull, Plate Size: 0.031 in, 1.37 in W, 0.37 in D, 3-1/4 in H, Flush Mounting, Steel, Satin Nickel, Fastener Type: Screw, Includes: Screws
Designed as an adjustable, guide for by-passing doors from 3/4 to 1-3/8 in thick. Keeps door properly aligned. Needs cardboard shim for proper spacing of 2 side sections. Includes screw.
N 6667 is a side mounted, top hung, adjustable wardrobe door roller assembly with a single 7/8 in convex nylon wheel for the front door panel. The stamped steel bracket assembly is adjustable and has a 1/4 in offset. It fits 3/4 to 1-3/8 in thick doors. Used on Atlas closet door systems.
National Hardware Sliding Door Hanger, Adjustable, 60 lb Weight, Plastic/Steel, Suitable for: 3/4 to 1-3/8 in Bypass Door
