Threaded hex hub, die-cast zinc inner race, flat edge, plastic wheel with steel ball bearings.

Threaded hex hub, die-cast zinc inner race, steel ball bearings, plastic wheel, round edge.

Threaded hex hub, die-cast zinc inner race, steel ball bearings, plastic wheel, round edge.

Threaded hex hub, die-cast zinc inner race, steel ball bearings, plastic wheel, flat edge.

Shower door bottom sweep with 3/4 in tee shaped tip, fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor.

M 6014 is a swinging shower door catch that mounts onto the swinging door frame. The stainless steel housing contains a spring-loaded plastic latch and is adjustable. The mounting holes (slots) are 1 in apart.

Ball bearing construction, nylon wheel with 8-32 threaded center hole and 7 to 16 in hub diameter that extends from back 1/8 in.

Injection-molded plastic bottom guide fits 7/16 in thick door panels. Installed with double sided tape or snaps into extrusion fin. Used by several shower door manufacturers.

Gray vinyl, star tip design inserts into receiver channel on door. The 1-5/16 in height fits many older style drip rail systems. For use on hinged shower doors.

Injection-molded plastic bottom guide fits up to 1/2 in thick door panels. Installed with double sided tape included. Used by several shower door manufacturers.

1 in T-shaped tip fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor.

Ball bearing construction, nylon wheel with 8-32 threaded center hole and 7 to 16 in hub diameter that extends from back 1/8 in.

Gray vinyl, universal design, 1-1/2 in flat shape fits most older style drip rail systems. For use on hinged shower doors.

If your shower door has worn out rubber seal and leaks water onto your floor, you can replace them with the Danco shower door seal. It features a durable plastic construction and will provide a positive seal to prevent water from leaking out from your shower. This shower door seal is 5/8 in W and 38 in L.

Extruded aluminum bracket with thru-glass 1/4 in binder post, 3/4 in flat edge plastic wheel and steel ball bearings. It is perfect for used on frameless shower doors.

If your shower door has worn out rubber seal and leaks water onto your floor, you can replace them with the Danco shower door seal for sterling shower doors. It features a durable plastic construction and will provide a positive seal to prevent water from leaking out from your shower. This shower door seal is 3/8 in W and is 48 in L making sure you have enough seal for your shower door. This rubber seal has a specific hollow seal that works for designer pivot shower doors. This seal is the perfect piece to keep your shower door from leaking water onto your bathroom floor.

Bottom guide used to keep glass door panels separated. Snaps into place on base of enclosure. Clear vinyl material.

White plastic bottom guide acts as a panel retainer. Used by Kinkead and Sterling.

Extruded aluminum adjustable brackets, round edge plastic wheel, steel ball bearings, used on frameless shower doors, up to 3/16 in thick glass. Includes gray gasket.

Bottom guide for sliding shower enclosure doors.

Plated die-cast handles, outside handle with threaded studs and inside handle with holes, supplied with stainless steel machine screws. Contains one handle set with installation screws.

Clear acrylic bottom guide for sliding tub enclosure doors. Fits on 1/2 in thick panels. Used by Sterling and others.

Prime-Line Shower Door Bottom Seal, Half-Round, Vinyl, Black, Dimensions: 36 in L x 5/32 in W x 13/16 in H