Submit search
Use #8 flat head screws. Designed to join two pieces of wood together at 90 deg angles, such as on screens and frames. Screw holes are countersunk. Drill a pilot hole with a 3/32 in sized drill bit when using wood screws.
National Hardware V116 T-Plate, Steel, Zinc, Number of Mounting Holes: 3, Mounting Hole Size: 1/4 in, 3 in L, 0.07 in Thick
The ProSource reinforces flat surface joints, seams and cracks. Can be used to repair furniture.
"Use 3/8"" bolts and/or 16d nails. Used to support the joining of a cross beam with a support beam by application to the side. FoUr superior strength plates should be used on both sides of the joint with through bolts."
National Hardware V116 T-Plate, Steel, Zinc, Number of Mounting Holes: 3, Mounting Hole Size: 1/4 in, 4 in L, 0.07 in Thick
Used to support the joining of a cross beam with a support beam by application to the side. Four superior strength plates should be used on both sides of the joint with through bolts.
Used to support the joining of a cross beam with a support beam by application to the side. Four excellent strength plates should be used on both sides of the joint with through bolts.
