Ready-to-use, cement base formula for decorating and waterproofing interior or exterior concrete, gunite, masonry or plastered swimming pools and other concrete and masonry surfaces, above and below ground. Dries to touch in 4 to 6 hours. Apply second coat in a minimum of 24 hours after first coat. Covers approximately 75-100 sq. ft. per gallon on rough surfaces and up to 125-150 sq. ft. per gallon over smooth surfaces.

Ready-to-use, cement base formula for decorating and waterproofing interior or exterior concrete, gunite, masonry or plastered swimming pools and other concrete and masonry surfaces, above and below ground. Dries to touch in 4 to 6 hours. Apply second coat in a minimum of 24 hours after first coat. Covers approximately 75-100 sq. ft. per gallon on rough surfaces and up to 125-150 sq. ft. per gallon over smooth surfaces.

Ready-to-use, cement base formula for decorating and waterproofing interior or exterior concrete, gunite, masonry or plastered swimming pools and other concrete and masonry surfaces, above and below ground. Dries to touch in 4 to 6 hours. Apply second coat in a minimum of 24 hours after first coat. Covers approximately 75-100 sq. ft. per gallon on rough surfaces and up to 125-150 sq. ft. per gallon over smooth surfaces.

Ready-to-use, cement base formula for decorating and waterproofing interior or exterior concrete, gunite, masonry or plastered swimming pools and other concrete and masonry surfaces, above and below ground. Dries to touch in 4 to 6 hours. Apply second coat in a minimum of 24 hours after first coat. Covers approximately 75-100 sq. ft. per gallon on rough surfaces and up to 125-150 sq. ft. per gallon over smooth surfaces.

Can be applied to mildly damp surfaces and over bare concrete and plaster. For use on new and previously finished concrete, gunite, fiberglass, polyester, bituminous and aluminum swimming pools that are to be filled with fresh or salt water. The fully cured paint film resists algae, mildew, alkalis and pool chemicals. Designed for maximum wear under water.

Can be applied to mildly damp surfaces and over bare concrete and plaster. For use on new and previously finished concrete, gunite, fiberglass, polyester, bituminous and aluminum swimming pools that are to be filled with fresh or salt water. The fully cured paint film resists algae, mildew, alkalis and pool chemicals. Designed for maximum wear under water.