Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity.
Protects and seals concrete surfaces against water, salt, grease, etc. Promotes proper curing by retaining water in freshly placed concrete. Used for curing new concrete.
Portland-cement base coating. Holds back 22psi of hydrostatic pressure. Safe for drinking water cisterns. Seals, protects and beautifies vertical walls constructed of concrete, masonry, brick or stucco. Eliminates dampness and resists mildew, flaking or chalking while sealing all pores and voids. Helps reduce Radon Gas penetration through concrete block walls. Just add water to powder and mix; brushes on like paint. Mix with Damtite Bonding Additive in place of water for previously-painted or non-porous surfaces (poured concrete). Coverage (varies by porosity of surface and by first or second coat): 7lb to 93 sq ft (8.6 m2); 21lb to 280 sq ft (26 m2); 45lb to 600 sf (55.7 m2).
Environmentally friendly. Asphalt emulsion. For spray or brush application to existing or new, green or damp concrete and masonry surfaces. For below grade applications to foundations, both poured concrete and CMU block. No odor, soap and water cleanup.
High performance masonry waterproofer used for above or below grade applications. Alkali-resistant coating provides excellent waterproofing protection with a decorative finish for all masonry, cinder and concrete block, poured concrete, brick, stucco. Use on basement walls, retaining walls, fountains, birdbaths, planters and more. Fast drying, low odor and tintable to light pastel shades. Easy clean up. Reduces Radon Gas penetration through concrete block walls. Covers up to 150 sq. ft. (11.6 m2) per gallon.
Guaranteed to stop up to 34psi of water pressure - twice the strength of other waterproofers. Prevents the growth of mold and mildew on the paint film for up to 5 years. Smooth, non-gritty finish applies easily to wet or dry walls. Ultra low odor oil-base formula has even less odor than latex paint. Great for basements and other interior/exterior above and below grade masonry surfaces. Watertite contains a mildewcide that prevents the growth of mold and mildew on the paint film only.
Cures to a tough, flexible, weather resistant film. Because of its ability to retain its pliability, the coating resists damage which may result from expansion and contraction caused by weather and temperature variation. Use as an exterior underground foundation coating and dampproofer for brick, concrete, cement block, and similar surfaces. May be used as an underground exterior foundation coating and dampproofer. Covers approximately 1 to 2 gallons per 100 square feet.
Designed to protect and beautify all types of concrete; decorative acid-stained, integrally colored, and plain as well as concrete pavers.
Protective coating for masonry surfaces. Prevents moisture damage. Penetrates deep to seal and protects masonry against acids, alkalis, household chemicals, gasoline, oil and salt. Covers up to 400 sq. ft. per gallon depending on surface porosity.
Decorates and waterproofs masonry walls. Use on above or below grade masonry walls, cinder and concrete blocks, stucco, brick, field stone foundations, retaining walls, basements and foundations. Cleans up with warm, soapy water. Coverage depends on surface porosity. Each 35 lb. will cover 140-210 sq. ft. with the first coat, 210-280 sq. ft. with the second coat.
A thin liquid applied coating designed to seal and penetrate exterior concrete and masonry surfaces while providing a moisture barrier. It can also be used as an anti-corrosive coating for below grade steel or metal piping. Seals and protects wood footings from decay and termites. Covers approximately 70 sq. ft. per gallon.
Adheres to all types surfaces. A heavy duty, Portland cement coating that includes a dry polymer resin to increase adhesion to all types of masonry surfaces. Eliminates need for liquid bonding agent to add to mix. Seals pores, cracks, voids and smooths rough surfaces. Protects against moisture penetration while beautifying and protecting concrete, stone, masonry, stucco and brick. Use above or below grade, inside or outside. Safe for coating inside of potable water cisterns or concrete water tanks. Holds back 22 psi of hydrostatic pressure. Covers up to 260 sq ft (24.2 sq m) per 35 lb pail.
Economical, heavy-duty, Portland cement-base coating to seal and protect concrete, masonry, brick, stone and stucco. Apply to wet or dry walls. Breathable coating so no moisture becomes trapped behind the surface. Holds back 12 PSI water pressure. Heavy duty formula. Can be used as an exterior, below grade foundation sealer on concrete block or poured concrete, prior to applying asphaltic-base coatings. Also for sealing and beautifying basement & garage walls, retaining & sea walls; Safe for coating the inside of cisterns for drinking water.
A cold applied liquid asphalt in a solvent system. Penetrating type coating formulated to provide a durable, weather resistant film. For long-wearing protection of foundation coating. Also use to dampproofing above and below grade exterior concrete and masonry walls and foundations that are thoroughly dry. Covers 1.5 to 2.0 gallons per 100 sq. ft. depending upon the porosity and roughness of the surface.
For the most demanding conditions. For above or below grade masonry walls, basement walls, retaining walls, foundations, landscape walls, cinder blocks, concrete blocks, bare concrete swimming pools, stucco and brick. Formulated to resist mildew growth on the paint film. Stops 15 psi. Passes ASTM D-7088 Resistance to Hydrostatic pressure and ASTM D-6904 resistance to wind driven rain. Covers 75 to 125 sq. ft per gallon depending on surface porosity.
Seals and protects concrete and masonry surfaces from the damaging effects of water, chemicals, and UV light. For use on driveways, patios, walkways, pool decks, basements and more. Provides a protective barrier to keep water out, protect against stains, and extend the life of your concrete while leaving a ?wet look?, high gloss finish.
Seals and protects concrete and masonry surfaces from the damaging effects of water, chemicals, and UV light. For use on driveways, patios, walkways, pool decks, basements and more. Provides a protective barrier to keep water out, protect against stains, and extend the life of your concrete while leaving a ?natural look?, low gloss finish.
For use on concrete prior to coating. Penetrates into concrete and reacts with the free calcium and water to form a gel in cracks, pores and capillaries to protect against the ingress of water and contaminants. This allows surfaces that were previously uncoatable, due to moisture, to be coated. Strengthens and seals from the inside out.
Protects from oil, rust, water and sprinkler stain penetration. Use on exposed aggregate, flagstone, concrete driveway, patio tile, walkway, and garage floor. Low odor and non-flammable. Leaves a clear natural wet look. Ready for traffic 8 to 24 hours. Apply with roller, brush, sponge, mop or airless sprayer. Covers 150 to 400 sq. ft. per gallon depending on porosity.