Repairs floors, furniture, plaster, walls or woodwork. Fills cracks, knots, nail and screw holes. Permanently adheres in cement, plaster, stone, tile and wood. Dries to a natural cream color. Can be colored by mixing with a latex or vinyl stain or latex paint (use only water soluble colors). Can be sawed, chiseled, sanded, painted, carved, polished, colored and molded.
Use to repair and rebuild dry rot and knotholes, window and door frames, screw holes, insect damage, furniture and carvings, handles and knobs. Paintable in 1 hour. Does not shrink or crack. Sets in 15-25 minutes. Can be sanded, drilled and tapped.
Single component adhesive, formulated to fully penetrate and revitalize rotted soft wood fibers found in window sills, sashes, frames, trim, beams and columns, fences, decks, paneling, flooring, log homes, playground equipment, picnic tables, cellar doors, and planking. Can be used to prepare old wood for priming and painting. Cures for service overnight. Milky white, clear when dry.
Used as an activant in BHS All Purpose Putty, BHS Metal Repair Compound, BHS Concrete, Brick and Stucco, and BHS Wood Filler.
Seals and hardens dry rotted wood to prevent further wood damage. Use for repairing, restoring, sealing and strengthening rotted wood on exterior trim, window sashes, windowsills, flooring, doors, picture frames, furniture, wood siding, fence post and more. Can be filled, painted or stained. Solvent-free, non-toxic and odorless.
Harden and strengthen severely rotted and insect damaged wood for structural results or marine environment. Support beams, decks, steps, hulls and historically significant wood. Pour or brush onto affected area. Full cures 3-7 days.
For restoration and remodeling. Use to fill, patch and repair PVC, tile, laminate and ceramic. Ready to sand and paint in 30 min. Accepts paint like wood. No shrinking or cracking. Water-resistant.
Formulated to strengthen and reinforce decayed or rotting wood. Use on windowsills, doors, woodwork, floors, decks, furniture, etc. Penetrates deep, strengthening decayed wood. Seals out moisture.
General purpose thinner and cleaning agent for epoxies. Ideal thinner for LiquidWood, epoxy wood hardener.
Use to repair, rebuild and restore rotted wood, windowsills, siding, cabinets and shutters. Can be carved, drilled, sanded, stained, varnished and painted. Dries in 30 min. No shrinking or cracking. Apply up to 1/2" per layer. Water-resistant.
For wood restoration, replacing rotted wood sections, securing wood to concrete, metal, or other surface and many other large wood repair and reconstruction projects when additional strength is required.
A stabilizing liquid that soaks into spongy, dry rotted wood fibers and then hardens. Stops rot in its track.
Makes invisible, permanent repairs to cracked walls and ceilings. Requires no sanding and can applied and painted in under an hour. The specially formulated acrylic emulsion retains its flexibility as it dries, without shrinking. Can be used on drywall, plaster, interior stucco, wood, concrete, and cement block. Cleans up easily with soap and water. Each kit repairs 20 feet of cracks. Contents: 1 fluid pint KRACK KOTE emulsion, 20 feet KRACK BRIDGE fabric, spreader, instructions and tips. (English, French, Spanish)
For strengthening and waterproofing rotted, dried-out, spongy wood. LiquidWood penetrates deep into soft wood fibers and hardens, consolidating the wood to a solid, structural material. Use on windows, sills, thresholds, doors, frames, columns, balustrades, floors, capitals, moldings, shutters, boats, and anywhere else wood rot is present. Meets architectural standards for historic wood repairs. Once cured, the epoxy can be sawed, planed, routed, carved, drilled, nailed, sanded, glued, and painted just like wood. LiquidWood is the ideal primer for WoodEpox. Consists of 2 clear epoxy liquids: resin (A) and hardener (B). 100% epoxy solids. Contains no water or solvents.
For repairing, replacing or adding to wood. Bonds to all types of wood, and most other rigid surfaces. Use on windows, sills, thresholds, doors, frames, columns, balustrades, floors, capitals, moldings, shutters, etc? Ideal for both interior and exterior use. Meets architectural standards for historic wood repairs. Bonds permanently with high-strength and will not shrink. Fills cracks, holes and voids of any size. Can be painted, stained, wood-grained, sawed, nailed, planed, sanded, carved and machined like wood. Can be cast into shapes and sculpted by hand before hardening. Bonds equally well to ceramics, concrete, metal, glass, and fiberglass. Contains no VOC?s or noxious odors. Color can be changed by mixing with stains, dyes or pigments. Light weight, 2 part putty for both horizontal and vertical surfaces.
Use on wood windows, sills, frames, columns, doors, moldings, clapboards, balustrades, furniture, and anywhere else wood is in need of strengthening and repair. This kit includes equal volumes of LiquidWood, parts A and B, WoodEpox, parts A and B, and the accessories needed to perform a complete wood repair. LiquidWood is a deep penetrating epoxy wood hardener that strengthens and waterproofs rotted, dried-out, or spongy wood. It restores structural strength and durability to wood fibers. WoodEpox is a shrink-free wood replacement compound that can be used in any thickness to replace and rebuild missing wood. It hardens within just a few hours and can be sanded, painted, stained, and finished just like wood. The products are easy to use and are 100% epoxy, free of any solvents or water. LiquidWood and WoodEpox are GreenGuard Certified for extremely low VOC emissions.
Shelf Display for 3 of the wood restoration skus. Includes: (3) Wood Restoration Kits (WRK6OR), (4) 12 oz LiquidWood (LWAB6OR) and (4) 12 oz WoodEpox (WEAB6OR) plus literature and a cured sample.