Submit search
Multi-use spreader/scraper. Won't rust or corrode. Each side of spreaders has a different notch size. Made in the U.S.A. Sizes: 1/16; 1/4 ; 1/8 , 1/4 x 1/8.
Multi-use spreader/scraper. Won't rust or corrode. Each side of spreaders has a different notch size. Made in the U.S.A. Sizes: 3/16 , 1/4 , 1/8 'V', and Tapered Edge.
Heavy-duty, solvent-proof, resists softening and wear. Durable and lightweight. 3/32" size for vinyl flooring and floor tile; 1/8" for carpet and vinyl tile; 3/16" for wall tile and tile board; and 1/4" for ceramic floor tile.
Made of galvanized material to prevent rust. Ribbed blade for rigidity and strength. Use on asphalt tile, linoleum and vinyl. 1/16"W x 1/16"D x 1/16"H notches.
Made of galvanized material to prevent rust. Blade is ribbed for rigidity and strength. Use for ceramic wall tile.
Reinforced handle and trowel design for strength. Beveled edges and notched blade sides for easy corner access. Heavy-duty, solvent-proof, resists softening and wear. 3/32" size for vinyl flooring and floor tile; 1/8" for carpet and vinyl tile; 3/16" for wall tile and tile board; 1/4" for ceramic floor tile; and 3/8" for heavy ceramic tile.
Angled for right- or left-hand use. Used to spread adhesive or mastic on the base surface before laying tile, carpet, or other floor coverings. Color-coded by notch size for easy identification.
All plastic blade is angled for both right and left handed users. Used to spread adhesive or mastic before laying tile, carpet, or other floor coverings. Color coded for easy identification.
All plastic blade and comfortable handle for smoothing concrete base. Straight ends.
Flat V notched pattern with 10 degree cutback. Used to spread adhesive or mastic before laying tile, carpet, or other floor coverings. Black plastic handle with full hardened steel blade.
Carbon steel with poly foam handle.
Notched trowels for the professional tile setter. Use for leveling, aligning cabinets, wallpaper borders, floors and wall tiles, walls and partitions.
2 sides: 1/16" x 1/32" x 1/32" and 1/16" x 1/16" x 1/16"
2 sides: 1/16" x 1/32" x 1/32" and 3/32" x 3/32" x 1/8"
Contains ergonomic TPR handle and notches for specific tile sizes.
Works with all caulking guns and cartridges. For cove base, paneling, flooring, ceramic tile, quarry tile, mirror tile, foam insulation board, tub kits, parquet flooring, carpet seams and edges, or wood molding. Applies 11 continuous thick or thin beads. Duct tape over nozzle holes to control the number of beads. Bead varies with pressure, speed and angle of application. For horizontal, vertical or overhead areas. Nozzle rotates to reach into corners and obstructed areas. Provides thick bead when holes are up, thin bead when holes are down. Can be resealed for future use while still on cartridge. Nozzle fits most standard 11oz and 30oz cartridge application guns. 3 inches wide.
Angled blade, comfortable TPR handle, notch specification stamped on blade.
