The 5904 fiberglass 4 ft step ladder has a duty rating of 225 lb with braces on the top step and top horizontal. Featuring a high performance HolsterTop? with a paint and tool holder, these step ladders have slip-resistant, TRACTION-TRED? steps and external PINCH-PROOF? spreaders. The EDGE? molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.

This Louisville 4 ft non-conductive fiberglass step ladder has a load capacity of 225 lb, rated ANSI Type II. This ladder is equipped with the innovative ProTop? with multiple tool slots, SHOX impact absorption system, slip-resistant rubber boot, pinch-resistant spreader braces and wide back braces. The Louisville FS4004 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.

The 6002 fiberglass 2 ft step stool has a large molded top that provides a comfortable working platform. This hearty step stool has a duty rating of 250 lb and the bottom step has front and rear knee braces. The external spreaders are PINCH-PROOF? and the TRACTION-TRED? steps are slip-resistant.

The 6005 fiberglass 5 ft step ladder features a HolsterTop? with the Lock-In System? that allows you to customize your ladder top. The system secures tools from falling while keeping them handy while working increasing productivity on the job. The tops also hold tools and have a sturdy paint can hanger on the back side. The external spreaders are PINCH-PROOF? and the TRACTION-TRED? steps are slip-resistant. This step ladder has a duty rating of 250 lb and offers the EDGE? bracing for enhanced strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.

The 6006 fiberglass 6 ft step ladder features a HolsterTop? with the Lock-In System? that allows you to customize your ladder top. The system secures tools from falling while keeping them handy while working increasing productivity on the job. The tops also hold tools and have a sturdy paint can hanger on the back side. The external spreaders are PINCH-PROOF? and the TRACTION-TRED? steps are slip-resistant. This step ladder has a duty rating of 250 lb and offers the EDGE? bracing for enhanced strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.

The 6204 fiberglass 4 ft step ladder is ideal for the homeowner or the professional. With a duty rating of 300 lb, it features a HolsterTop? with the Lock-In System? to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy-duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE? structure. The EDGE? bracing system helps protect the rail from damage. Each TRACTION-TRED? step is slip-resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.

The 5906 fiberglass 6 ft step ladder has a duty rating of 225 lb with braces on the top step and top horizontal. Featuring a high performance HolsterTop? with a paint and tool holder, these step ladders have slip-resistant, TRACTION-TRED? steps and external PINCH-PROOF? spreaders. The EDGE? molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.

Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.

This Louisville 6 ft non-conductive fiberglass step ladder has a load capacity of 225 lb, rated ANSI Type II. This ladder is equipped with the innovative ProTop? with multiple tool slots, SHOX impact absorption system, slip-resistant rubber boot, pinch-resistant spreader braces and wide back braces. The Louisville FS4006 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.

Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3".

This Louisville 5 ft non-conductive fiberglass step ladder has a load capacity of 250 lb, rated ANSI Type I. This ladder is equipped with the innovative ProTop? with magnet and multiple tool slots, SHOX impact absorption system, slip-resistant rubber boot, pinch-resistant spreader braces, wide back braces and double-rivet step construction. The Louisville FS2005 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.

The 5908 fiberglass 8 ft step ladder has a duty rating of 225 lb with braces on the top step and top horizontal. Featuring a high performance HolsterTop? with a paint and tool holder, these step ladders have slip-resistant, TRACTION-TRED? steps and external PINCH-PROOF? spreaders. The EDGE? molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.

This Louisville 6 ft non-conductive fiberglass step ladder has a load capacity of 250 lb, rated ANSI Type I. This ladder is equipped with the innovative ProTop? with magnet and multiple tool slots, SHOX impact absorption system, slip-resistant rubber boot, pinch-resistant spreader braces, wide back braces and double-rivet step construction. The Louisville FS2006 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.

The 6205 fiberglass 5 ft step ladder is ideal for the homeowner or the professional. With a duty rating of 300 lb, it features a HolsterTop? with the Lock-In System? to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy-duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE? structure. The EDGE? bracing system helps protect the rail from damage. Each TRACTION-TRED? step is slip-resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.

The 6008 fiberglass 8 ft step ladder features a HolsterTop? with the Lock-In System? that allows you to customize your ladder top. The system secures tools from falling while keeping them handy while working increasing productivity on the job. The tops also hold tools and have a sturdy paint can hanger on the back side. The external spreaders are PINCH-PROOF? and the TRACTION-TRED? steps are slip-resistant. This step ladder has a duty rating of 250 lb and offers the EDGE? bracing for enhanced strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.

The 6206 fiberglass 6 ft step ladder is ideal for the homeowner or the professional. With a duty rating of 300 lb, it features a HolsterTop? with the Lock-In System? to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy-duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE? structure. The EDGE? bracing system helps protect the rail from damage. Each TRACTION-TRED? step is slip-resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.

This 6 ft non-conductive DeWALT? fiberglass step ladder has a load capacity of 250 lb, rated ANSI Type I. This ladder features an innovative top with magnet and multiple tool slots, an impact absorption system, slip-resistant aluminum shoes, wide back braces and double-rivet step construction. This DeWALT? DXL3110-06 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.

This Louisville 4 ft fiberglass cross step ladder has a type IA duty rating with load capacity of 300 lb. This ladder combines the shelf and step ladder for a 2-in-1 combination made to take on multiple placement locations. The shelf design and its unique ProTop? and innovative locking mechanism allows for positioning against a wall, building or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The cross-step ladder is equipped with a V-shape ProTop? with non-marring slip-resistant rubber tread that allows it to be placed safely on corners and poles. This ladder's ProTop? also features a magnet and multiple slots that allow quick and easy access to your tools.

This Louisville 8 ft non-conductive fiberglass step ladder has a load capacity of 225 lb, rated ANSI Type II. This ladder is equipped with the innovative ProTop? with multiple tool slots, SHOX impact absorption system, slip-resistant rubber boot, pinch-resistant spreader braces and wide back braces. The Louisville FS4008 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.

This Louisville 6 ft non-conductive fiberglass step ladder has a load capacity of 300 lb, rated ANSI Type IA. This ladder is equipped with the new and innovative raptor top with magnet and multiple tool slots, SHOX impact absorption system, new raptor boots with non-marring bonded tread mechanically fastened to the upper boot to create a secure slip-resistant footing, inside spreader braces, wide back braces and double-rivet step construction. The Louisville FS1506 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.

The 7306 fiberglass 6 ft step ladder has a duty rating of 375 lb and features a heavy-duty aluminum HolsterTop?. With a full set of horizontals and heavy-duty internal spreaders, these ladders are built for the long haul. The molded external rail shields and the EDGE? bracing system help decrease damage to the rails. The slip-resistant TRACTION-TRED? steps are single riveted and have extra wide knee braces. The GLAS*MARK? violator stripes increase the visibility of the ladder on the jobsite. Fiberglass rails are non-conductive for working near electricity.

This 6 ft non-conductive DeWALT? fiberglass step ladder has a load capacity of 300 lb, rated ANSI Type IA. This ladder features an innovative top with magnet and multiple tool slots, 25% greater step surface, an impact absorption system, heavy-duty boots with non-marring bonded tread mechanically fastened to the upper boot to create a secure slip-resistant footing, inside spreader braces, wide back braces and double-rivet step construction. This DeWALT? DXL3010-06 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.

This Louisville 6 ft fiberglass cross step ladder has a type IA duty rating with load capacity of 300 lb. This ladder combines the shelf and step ladder for a 2-in-1 combination made to take on multiple placement locations. The shelf design and its unique ProTop? and innovative locking mechanism allows for positioning against a wall, building or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The cross-step ladder is equipped with a V-shape ProTop? with non-marring slip-resistant rubber tread that allows it to be placed safely on corners and poles. This ladder's ProTop? also features a magnet and multiple slots that allow quick and easy access to your tools.

This 8 ft non-conductive DeWALT? fiberglass step ladder has a load capacity of 250 lb, rated ANSI Type I. This ladder features an innovative top with magnet and multiple tool slots, an impact absorption system, slip-resistant aluminum shoes, wide back braces and double-rivet step construction. This DeWALT? DXL3110-08 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.

This Louisville 8 ft non-conductive fiberglass step ladder has a load capacity of 250 lb, rated ANSI Type I. This ladder is equipped with the innovative ProTop? with magnet and multiple tool slots, SHOX impact absorption system, slip-resistant rubber boot, pinch-resistant spreader braces, wide back braces and double-rivet step construction. The Louisville FS2008 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.

The T6206 fiberglass 6 ft twin step ladder offers a high performance dual HolsterTop? with a paint and tool holder for convenience. The internal spreaders are heavy-duty and the slip-resistant TRACTION-TRED? steps are all double riveted and knee braced. These twin step ladders allow 300 lb per side making them ideal for one or two person jobs. The EDGE? molded brace and foot pad combination provide bracing strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.

This Louisville 8 ft non-conductive fiberglass step ladder has a load capacity of 300 lb, rated ANSI Type IA. This ladder is equipped with the new and innovative raptor top with magnet and multiple tool slots, SHOX impact absorption system, new raptor boots with non-marring bonded tread mechanically fastened to the upper boot to create a secure slip-resistant footing, inside spreader braces, wide back braces and double-rivet step construction. The Louisville FS1508 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.

Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental.

Built to last, the WERNER 375 lb duty-rated 7406 fiberglass 6 ft step ladder is rugged and ready for the job. This ladder features extra heavy-duty aluminum HolsterTop?, internal spreaders and external rail shields for long lasting durability. With The EDGE? bracing system and GLAS*MARK? violator stripes on the rails, the 7400 Series is built to handle the worksite and stands ready for tough jobs. Fiberglass rails are non-conductive for working near electricity.

The Old Blue? Series OBCN06 fiberglass contractor ladder is not your ordinary step ladder, it is a Jobstation?. With a duty rating of 375 lb, this 6 ft ladder is custom-made with contractors in mind. The HolsterTop? with Lock-In System? allows tools to be secured right to the ladder top making them handy and ready to use. The MagnaGrip? heavy-duty magnet secures tools and hardware right to the ladder top. The Multi-use hook is ideal for hanging tools and tool buckets. The EDGE? bracing system helps to decrease damage to the rails. Fiberglass rails are non-conductive for working near electricity.