Submit search
For exterior scaffolding. Meets ANSI, CSA and OSHA standards. 1-1/2 in x 3 in.
Made of corrosion-resistant stainless steel. Can be used for both standard mason and walk-through (arch) scaffold frames. Used to hold METALTECH coupling pin on scaffolding frame. Meets ANSI, CSA and OSHA standards. For a hole 1/2 in.
Replacement coupling pin with 1 in. collar includes locking spring. Rugged steel construction ensures lasting durability. Use with standard or arched scaffold frames. Serves as connector when stacking mason and arch scaffold frames. Tapered end allows for easy stacking. Weather resistant for lasting use. This pin is acceptable for both 1.69 in. and 1-5/8 in. tube OD frames. Meets OSHA standards for safety.
Use to lock when stacking frames. Use with standard or arched scaffold frames. Distance between the bolt holes are 13 in. Blue powder-coat for corrosion protection. Meets ANSI, CSA and OSHA standards. Weather resistant.
Providing a complete range of roof brackets, Qualcraft offers fixed and adjustable roof brackets for all roof pitches and materials including slate. Durable, easy-to-install and remove and designed to protect all roof surfaces, Qualcraft is the only name you'll need to remember for professional roofing tools. Capacity is one worker plus 40 lb/8 ft staging. Maximum of 8 ft of spacing between brackets.
The adjustable roofing bracket attaches to the our pump jack system to offer a sturdy, flat surface to stand on while roofing or working at heights. The bracket features a durable all-steel construction with an adjustable 6 in or 10 in platform. This product is designed to be used with 2 in x 6 in or 10 in planks, the bracket allows for easy installation and removal without damaging shingles. Already compliant with OSHA regulations, it is recommended to use at least on bracket per every 8 ft of spacing.
Meets ANSI, CSA and OSHA standards.
The casters can swivel and rotate 360 degrees, which makes moving and turning the scaffold easy. Smooth and quiet operation. Perfect for industrial applications, such as warehousing, delivery, medical devices, factories, and so on.
Used as bracing for wood poles. Pole should be constructed in accordance with operating instructions.
For use with I-CISC, I-CISCTP, I-CISCPY, I-CAISC and I-IRC scaffolds. Black polypropylene. 30-1/4 x 20 x 2-3/4 in.
The Pump jack pole anchor fits double 2x4 wood poles and provides an additional margin of safety and security on your jobsite. In loose soil conditions, this anchor also provides mud sill.
With hollow plate. Meets ANSI, CSA and OSHA.
The guardian fall protection 2-rung ladder jack is MIG welded and possesses a riveted construction for excellent strength and durability. It is setup over 2 consecutive ladder rungs, can be used on either side of a ladder and is ideal for painting, siding and repair applications. This jack is easy to both install and remove and will even accommodate planking up to 18 in wide when used in combination with a paired Ladder Jack and installed and used in accordance with all applicable OSHA regulations.
This multi-use scaffolding unit can provide additional stability and extend the width of the scaffold base, giving you options to enhance your safety.
Steel construction. Adjustable to any height up to 30 ft. Your weight does the work. Raise or lower men and equipment. Held secure to wood poles with a positive double lock system. Raise to position with foot pump and lower with crank. Must be used in strict compliance with Federal OSHA regulations. New York State Approval No. 4781.
Powder coated. Flip locking system. Includes coupling pins and spring-locks. Gravity-lock frame lock. 48in lock spacing. Interior tubes: outside diameter 1 in. 16 ga Perimeter tubes: outside diameter 1-5/8 in. 13 ga Meets ANSI and OSHA Standards.
Designed for scaffold frames that have 4 ft. locking pin spacing. Cross brace must be installed on each leg of a frame or arch frame to reach its full load capacity. Works with both standard and arched scaffold frames for versatile use. Durable construction with 1 in OD galvanized steel tube, 16 ga Weather Resistant. ANSI Specified. CSA Certified. OSHA Approved.
Use to provide additional stability for higher elevations. High performance steel and heavy duty welds for a solid and secure footing. Use with any standard or arched scaffold frames. Blue anti-slip baked on powder-coated textured finish for maximum corrosion resistance. Meets OSHA requirements.
Assembled dimension of 19-1/4 in x 4-1/2 in x 24 in, weighs 33 lb. 5 in double locking heavy-duty casters. Includes four outriggers, four casters and 12 locking pins. Compatible with I-CISC, I-CISCTP and I-CAISC. Meets ANSI, CSA and OSHA standards.
The AC10-20-02 two rung long body ladder jack is designed for quick field adjustments. The platform clamp system clamp secures the platform to the ladder jacks and ties supporting ladders together to help secure an entire ladder jack system. The lightweight but sturdy jack mounts on either side of the extension ladder. It accepts stages up to 20 in width. Recommended for use with 300 lb Type IA and 375 lb Type IAA extension ladders.
This mini scaffold are built to help make your work easier and safer. Safety is key when working in heights. Quality control, testing procedures, precision of the welding process, correct installation are key when assembling a scaffold structure to minimize liability and worker risk of injury.
5500 Series aluminum decked ALUMA-PLANK? for use with steel scaffolds. Duty rating is 75 lb/sq-ft. Perforated tread for slip resistance.
