Submit search
Fits standard .550" X 1.125" panel cutouts. Economy spade terminal type. Designed for machinery or appliances.
Jandorf Slide Switch, 2-Position, 125 V, 3 A, 1 Poles, Contact Configuration: SPST, On-Off, 2 Tab Terminal, Standards: UL Listed
Jandorf Slide Switch, 2-Position, 125 V, 3 A, 2 Poles, Contact Configuration: DPDT, ON/ON, 6 Tab Terminal, Standards: UL Listed
Jandorf Slide Switch, 2-Position, 125 V, 3 A, 1 Poles, Contact Configuration: SPDT, ON/ON, 3 Tab Terminal, Standards: UL Listed
Jandorf Slide Switch, 2-Position, 125 V, 3 A, 1 Poles, Contact Configuration: SPDT, On-Off, 3 Tab Terminal, Standards: UL Listed
Heavy-duty spade type terminal. Fits .830" x 1.45" panel cut-outs.
For pole barns.
Square rocker, fits round hole. On-off. 1.1 x 1.1 x 0.9 inches.
Miniature rocker switch that fits .520" X .776" panel cutouts. Lighted. CSA Listed.
Toggles On/Off.
Rated 125 volt, .3 watt. Red lens.
Jandorf Rocker Switch, Square, Series: 61008, 125 V, 0.3 A, Contact Configuration: SPST, Normally Off, 1 Poles, Momentary Operation, 2-Tab Terminal, UL Listed
Jandorf Rocker Switch, Single Circuit Square, Series: 61013, 250 V, 5 A, Contact Configuration: SPST, Normally On, 1 Poles, Momentary Operation, 2-Tab Terminal, UL Listed
Jandorf Rocker Switch, Single Circuit, Series: 61101, 125 V, 10 A, Contact Configuration: SPDT, Normally On/Off/On, 1 Poles, Momentary Operation, 3-Tab Terminal, UL Listed
Indoor wireless remote and plug-in receiver kit. Wireless radio frequency remote control adds switched outlet convenience without wiring or the need for an electrician. Plug lamp into the receiver and the receiver into any outlet. A press of the handheld transmitter button turns whatever is plugged into receiver on or off. Works with incandescent, compact fluorescent and LED bulbs. Plastic housing. 240 watts tungsten load. 8 amps maximum load resistive. 120 volts. 3.85" x 2.5" x 1.5".
Remote control operation (includes CR2032 3V button cell battery) with up to 80 ft range. Two 3 prong grounded outlets, use with indoor devices requiring a grounded connection, control 2 devices from one outlet. Compatible with CFL, LED, fluorescent and incandescent bulbs. 15A resistive, 5A tungsten.
Remote control operation (includes CR2032 3V button cell battery) with up to 80 ft range. Two 3 prong grounded outlets, use with indoor devices requiring a grounded connection, control 2 devices from one outlet. Reverse ground pin placement, when mounted to wall, unit accepts most right angle and transformer plugs. Compatible with CFL, LED, fluorescent and incandescent bulbs. 15A resistive, 8A tungsten.
Push button switch with metal box, cover plate and mounting hardware to operate lights when door is opened. Mounts in door jamb. Fits in 1.25" x 2.75" x 2.0" deep, approximate mounting hole. 6" wire leads. Lighting control: 16 amp at 125 volts AC, 10 amp at 250 volts AC, 10 amp at 277 volts AC. Mechanical control: 1/2 HP at 125 - 277 volts AC. Normally on - grounded.
Plugs into any standard outlet. Push button controls. Remote has a 60' range. Operates lights, small appliances. Water proof for outdoor use. Base unit has a 6", 16 gauge cord and a rain tight case. Ratings: 16/3 SJTW cord - 13 amp resistive - 1000 watt Tungsten.
