Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth, and external ice formation. UL Listed with a NEMA 6P rating per section 314.29.
Made of 16 gauge steel. Junction boxes for terminating power or communication conductors. Boxes have flat, removal covers fastened with screws. Mounting holes in the back. Gray enamel finish.
Non-metallic PVC floor box. Water tight gasket and corrosion resistant hardware. Concrete or wood subfloor construction approved. Minimum concrete dept required is 3-1/2". Will provide optional low voltage divider permitting three services (data, telephone, and power) access. Accepts 1/2", 3/4" and 1" conduit and has PVC molded ports. Includes two 1" x 3/4", two 3/4" x 1/2" reducer plugs and two 1" and 3/4" hubs. 90 cubic inch capacity.
Duplex outlet with ABS cover and dual hinge caps to keep out dust. Adjusts from 0" to 1-7/8", 21 cubic inch capacity. UL Listed 5274 and classified 2HR W/C. UL514C scrub water tested. Patented residential design.
Single hole installation. Includes everything needed to install including a hole saw, solid brass cover and single gang grounded receptacle. Low voltage telephone/cable insert plate included. Includes blank plate for custom installation. Polycarbonate construction.
Includes box, gasket, receptacle, brass cover plate and closure cap with rubber "O" ring. Can be used in industrial and residential environments. UL Listed.
Flush floor mount, for duplex or GFCI receptacle, used with Carlon floor box E971FB. Solid brass cover, plastic adapter ring, gasket and everything needed for installation is included. (Receptacle sold separately).
Round duplex receptacle floor box. Duplex cover with lift lids, 2-1/2" bottom knockout, 18.5 cubic inch capacity. Cast iron construction with gray powder coat finish for corrosion resistance. Suitable for carpet, tile or wood floor applications. Mop water tight. If floor covering is used, discard included brass tile flange and replace with RACO 6235 carpet flange. Includes: box, brass duplex lift lid cover, and brass tile flange. Receptacle not included. UL Listed. 4.19" diameter.