Black vinyl electrical tape for common electrical uses. 7 mil., UL Approved.

General purpose electrical insulating tape, good dielectric strength. 7 mils thick. UL Listed and CSA Certified.

Black PVC electrical tape is UL Listed to 600 volt. 7.5 mil. thickness and a temperature rating up to 80 degrees Celsius/176 degrees Fahrenheit. Elongation of 200 percent allows tight wrapping and sealing.

For use up to 600 volts. PVC film coated with a non-corrosive rubber based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead free. Temperature range from 32 to 176 degrees F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general purpose maintenance and repair. 7 mil. thick. UL Listed and CSA Certified.

For use up to 600 volts. PVC film coated with a non-corrosive rubber based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead free. Temperature range from 32 to 176 degrees F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general purpose maintenance and repair. 7 mil. thick. UL Listed and CSA Certified.

PVC film coated with a non-corrosive rubber based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead free. Temperature range from 32 to 176 degrees F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general purpose maintenance and repair. 7 mil. thick. UL Listed and CSA Certified.

For use up to 600 volts. PVC film coated with a non-corrosive rubber based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead free. Temperature range from 32 to 176 degrees F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general purpose maintenance and repair. 7 mil. thick. UL Listed and CSA Certified.

For use up to 600 volts. PVC film coated with a non-corrosive rubber based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead free. Temperature range from 32 to 176 degrees F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general purpose maintenance and repair. 7 mil. thick. UL Listed and CSA Certified.

Commercial grade 7-mil polyvinyl chloride insulating tape, flame retardant and provides mechanical protection with minimum bulk. Excellent resistance to abrasion, moisture, acids, copper corrosion and varying weather conditions. UL Listed and CSA Certified.

For use up to 600 volts. PVC film coated with a non-corrosive rubber based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead free. Temperature range from 32 to 176 degrees F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general purpose maintenance and repair. 7 mil. thick. UL Listed and CSA Certified.

For use over electrical tape splices. Matted finish provides the best gripping surface available. Use to wrap grips on hand tools.

Quality colored electrical tape, designed for general purpose electrical applications. Made from low-lead PVC material, is resistant to abrasion, UV rays, moisture and many acids. 7 mil (0.18) commercial grade, weather resistant, pressure sensitive. Flame retardant and can be used as primary insulation for splices up to 600 volts and 80 degrees C (176 degrees F). UL 510, CSA 22.2.

Quality colored electrical tape, designed for general purpose electrical applications. Made from low-lead PVC material, is resistant to abrasion, UV rays, moisture and many acids. 7 mil (0.18) commercial grade, weather resistant, pressure sensitive. Flame retardant and can be used as primary insulation for splices up to 600 volts and 80 degrees C (176 degrees F). UL 510, CSA 22.2.

Quality colored electrical tape, designed for general purpose electrical applications. Made from low-lead PVC material, is resistant to abrasion, UV rays, moisture and many acids. 7 mil (0.18) commercial grade, weather resistant, pressure sensitive. Flame retardant and can be used as primary insulation for splices up to 600 volts and 80 degrees C (176 degrees F). UL 510, CSA 22.2.

Malleable non-conductive compound for sealing of electrical raceway connections from air, noise and moisture.

For insulating, repairing and protecting electrical wire. UL Listed.

Insulates and seals surfaces. Fuses to itself during application to stay watertight. Suitable for applications up to 600 volt. Temperature range from 0 to 176 degrees Fahrenheit.

General purpose black electrical tape. Made from low-lead PVC material. Suitable for applications up to 600 volt. Temperature range from 0 to 176 degrees Fahrenheit.

Resists water, oils, alkalies, acids, weather, ultraviolet rays, abrasion, corrosion and moisture. Use as a primary insulation for wide cable splices up to 600 volt, for fixture and wire splices up to 1000 volt and to maintain electrical and high temperature integrity of electrical systems. 7 mil, UL Approved and CSA Certified.

Resists water, oils, alkalies, acids, weather, ultraviolet rays, abrasion, corrosion and moisture. Use as a primary insulation for wide cable splices up to 600 volt, for fixture and wire splices up to 1000 volt and to maintain electrical and high temperature integrity of electrical systems. 7 mil, UL Approved and CSA Certified.

Used in phase identification, color coding leads and piping systems and for marking safety areas. Abrasion and weather resistant, flame-retardant with excellent mechanical and electrical insulation properties. Wraps smoothly and holds tight in cold to 0 degrees F or hot to 220 degrees F. UL Listed and CSA Certified.

Used in phase identification, color coding leads and piping systems and for marking safety areas. Abrasion and weather resistant, flame-retardant with excellent mechanical and electrical insulation properties. Wraps smoothly and holds tight in cold to 0 degrees F or hot to 220 degrees F. UL Listed and CSA Certified.

Used in phase identification, color coding leads and piping systems and for marking safety areas. Abrasion and weather resistant, flame-retardant with excellent mechanical and electrical insulation properties. Wraps smoothly and holds tight in cold to 0 degrees F or hot to 220 degrees F. UL Listed and CSA Certified.

Used in phase identification, color coding leads and piping systems and for marking safety areas. Abrasion and weather resistant, flame-retardant with excellent mechanical and electrical insulation properties. Wraps smoothly and holds tight in cold to 0 degrees F or hot to 220 degrees F. UL Listed and CSA Certified.

Used in phase identification, color coding leads and piping systems and for marking safety areas. Abrasion and weather resistant, flame-retardant with excellent mechanical and electrical insulation properties. Wraps smoothly and holds tight in cold to 0 degrees F or hot to 220 degrees F. UL Listed and CSA Certified.

Vinyl electrical tape, black, 7 mil thick with PVC backing, provides protective jacketing for high-voltage cables and wire harnesses, and primary electrical insulation for splices up to 600 volt. Abrasion, corrosion, and UV resistant, resists alkalis and acids, and is flame-retardant. All-weather performance in cold to 0 degrees F or heat to 220 degrees F. UL Listed and CSA Certified.

Thick 8.5 mil. Recommended for low temperature applications because of its superior cold weather handling features. Flexible for use on small wires. Inside or outside. Resists cold, ultraviolet rays, moisture, alkalies, acids and corrosion.

Good abrasion resistance, used for protection for electrical tape splices and connectors. Made in the USA. UL Approved.

Insulates and protects against abrasion, weather, water, solvent splashes and chemicals. Stretchy, vinyl plastic. Applications include home, marine, auto, trailers and tools. Flame retardant. Pack of 5 colors.

Semi-cured rubber for low voltage electrical insulation, 30 mil. Self-vulcanizing and water resistant.