Test for presence of voltage in live circuits. Tests AC/DC voltage from 80-250 volts. The neon indicator glows when voltage is present and brightens as voltage increases. Insulated housing and 2 inch test leads. Built in pocket clip. Tests DC motors, switches and outlets. With detailed user instructions.
For testing electric circuits from 90 to 600 volt. Detects presence of power on either AC or DC circuits. Identifies circuit conductors.
Tests AC/DC voltage from 5-50 volt. Glows when voltage is present and brightens as voltage increases. Insulated alligator clip tests leads. UL Listed. Carded.
Tests standard receptacles and extension cords to ensure proper wiring. Neon indicators give positive indication of circuit status. Compact unit simply plugs into any standard 3-wire/grounded receptacle or extension cord (110 /125 volt circuits). Tests for six circuit conditions: open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring. Yellow and red lights provides indication of circuit status or specifies wiring errors.
Tests for breaks in non-energized wires or cords. 360 degree visual indication. Durable, heavy-duty tip. Flexible lead with insulated alligator clip. Pocket clip. Operates from 2 AAA batteries (included).
Large, dual, neon indicators acknowledge presence of voltage. Individual indicators for each voltage range assures reliability of testing. Probes snap on bottom of housing for single hand testing of outlets. Insulated leads and housing. Tests from 100 to 300 volt AC/DC. UL Listed.
Three-way live circuit tester indicates 120, 240 and 277 volt AC. UL Listed.
Economy continuity tester, tests continuity in nonenergized circuits. Features 36" insulated lead with alligator clip end. Fully shielded indicator bulb lights to indicate continuity, Uses 2 AA batteries, not included.
Tests ground fault breakers by overloading circuit and tripping GFCI. Plug tester into any ground fault receptacle (110-125 volt AC) and press black button to overload circuit. Tests for seven conditions; ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring. Yellow and red lights provide indication of circuit status or specify which wire is defective. Carded.
Test continuity without wire probes on non-energized circuits. Tests AC/DC voltage from 12 to 250 volts on energized circuits. Glows when voltage or continuity exists. Uses 2 button batteries, included. UL Listed. Carded.
LOW/GOOD indicator. Movable contact arm to fit AA, AAA, C, D, 9 Volt and 1.5 volt button cells.
Compact ergonomic design. Hi-impact ABS housing. Visual voltage indication. Snap-in leads are spaced to fit a standard outlet for easy, hands-free testing. Tests for voltage at 120 volt, 240 volt, 277 volt and 480 volt. With pocket clip. cULus Listed.
Tests from 50-600 volt AC. Visual (flashing) and audible (beeping) indicators signal presence of voltage. Built-in "safe test" feature to assure batteries are operating properly. Compact design with pocket clip to fit in shirt pocket. UL Listed.
Contains the most common wiring tools and a voltage tester. Includes one No.GS-67 multi-function crimper/stripper, one No.CR-100 cable ripper and one GET-102 90-300 volt AC/DC circuit tester.
Compact, tests AC/DC voltage to 300 volt, DC current to 250mA, resistance to 1 M ohm, decibels from -20 to +56dB. Diode protected. With fuse overload protection circuitry. 250 mA fuse. Includes safety test leads and instruction manual. CAT Rating: II 300 volt. cETLus Approved.
Contains the most common circuit testers for convenient electrical troubleshooting. One each No. GCT-204 continuity tester, No. GRT-500 receptacle tester and No.GET-102 90-300 volt AC/DC circuit tester.
For testing AC/DC voltage and current resistance. Low battery indicator. DC voltage 600. AC voltage - 500 volts AC. Resistance - 2 meg Ohms. Input impedance of 10 meg Ohms. Rated CAT 111 600 volts, cETLus and CE. Uses one 9 volt battery, not included.
Holiday lights tester. Multi-purpose 12-600 VAC adjustable non-contact voltage tester with bulb and fuse tester, bulb puller. Bulb tester on the back tests both LED and incandescent light-string bulbs. Adjustable sensitivity non-contact voltage tester. 360 degree bright red light and an audible beeping indicate the presence of voltage. Requires 2 LR44 button cell batteries for operation (included). 7" height x 1.25" width x 1.2" length/depth.
GB Analog Multimeter, 500 V, 250 mA, 50 k, -20 TO 56 dB Decibels, +/- 4 % Accuracy, Includes: Spare Fuse, ETL Listed, CE Certified, 6-Function, 14-Range
Test GFCI receptacles and determine the appropriate wiring correction needed. Provides a clear and easy-to understand single LED readout indication for correct wiring or bad ground, open neutral, hot/gnd reverse, hot/neu reverse and open hot wiring errors. Includes a GFCI test function to test outlets wired in parallel to GFCI circuits (bathroom, kitchen and outdoor receptacles require GFCI protection). Hi-impact ABS housing with a 250 pound crush rating and the ability to withstand drops of up to 10 feet. Bright 360 degree viewable LED indicator light. Beeping audible indicator confirms test completion. 4" height x 2" width x 1.25" length/depth.
DualCheck non-contact voltage tester and GCFI outlet tester. GFCI outlet tester on one end and a 50-1000V AC non-contact voltage tester on the other. Features a bright 360 degree LED visual indicator along with an audible beeping indicator of the presence of voltage. Single LED readout indicating correct wiring or bad ground, open neutral, hot/ground reverse, hot/neutral reverse, and open hot wiring errors. 250 pound crush rating and the ability to withstand drops of up to 10 feet. 7" height x 1.38" width x 1.2" length/depth.
Self-calibrating receiver with audible and visual indicators. Self-powered transmitter with audible and visual indicators. Working voltage range of 80-140 volts AC maximum to ground at 50-60 Hz. Operating temperature 32 to 122 degrees F. Storage temperature -4 to 158 degrees F. Power supply for the receiver is one 9 volt transistor type battery, not included. Transmitter is 3.3" height x 2.6" width x 1.1" depth, 2.5 oz. Receiver is 6.3" height x 3.4" width x 1.3" depth, 5.1 oz. UL Listed to both US and Canadian standards.
Gives instant, accurate digital readout of 0-15.0 amp or 0-1875 watts used by common cord-connected household appliances and lights. Slide-switch instantly converts between amp and watts. 26" cord plugs in to 15 amp electrical outlet, appliance plugs into tester. Rugged, high-impact construction. UL listed.
Reads voltage, current, resistance, temperature, and more with turn of the dial. It also allows a smartphone to serve as a second viewing screen. All data goes directly from the meter to the free ToolSmart smartphone app. Integrated non-contact voltage (NCV) detector. ETL certified safe for CAT III 600V use. Use a 9V battery (included). 5.8" x 2.9" x 2". Includes one pair of double-insulated test leads, Bead thermocouple probe and plug adapter, 9V battery and user's manual.
With overload protection on all ranges, 3.75 digital liquid crystal display (LCD), maximum reading 3999. Maximum 450 volts. Range hold, continuity, diode test. Built-in test leads, 2 times per second sampling rate. Auto power off after approximately 10 minutes. Operating environment: 32 degrees to 104 degrees F. Storage temperature: -4 to 140 degrees F. 300 hours typical life with carbon zinc batteries. Operates from (2) LR44 batteries, included. C-77 booklet style carrying case and operating instructions included. cULus Listed to both US and Canadian standards. Meets CE requirements. 4-1/4" height x 2-1/4" width x 1/2" depth.
Tests all coax and Cat 3-6 patch cords and installed cables for opens, shorts, miswires, reversals and shield continuity.
With protective rubber boot. Durable housing is drop resistant to 6 ft and crush rated to 150 lbs. For testing AC/DC voltage, current resistance, diodes, temperature. Tests 1.5 volt batteries. Easy to read backlit display. Low battery indicator, auto off. Audible continuity. DC voltage 250. AC voltage - 500 volts AC maximum. Resistance - 20 Meg Ohms. Input impedance of 10 meg Ohms. Temperature test with probe -40 to 1832 degrees Fahrenheit. Magnetic strap included. Rated CAT 111 600 volts, cETLus and CE. Uses two AA batteries, not included.
Test all wiring applications in the home or office. Includes 4 high quality test products, the GVD-3504A non-contact circuit alert to test AC voltage presence, GFI-3501A ground fault receptacle tester to test correct wiring of outlets, GTT-3200 dual telephone line tester to check for proper wiring of telephone jacks and the GDT-311 5-function, 11-range digital multimeter with test leads to test AC and DC voltage, DC current, resistance, and continuity. Comes with a durable plastic case with a foam insert to protect and hold products in place.
Identify correct circuit breaker or fuse protecting a specific electrical circuit. Audible alert and bright LED visual indication. The signal is generated by a plug style tool that also verifies the correct wiring of outlets and includes GFCI test functionality. Magnetic back attaches to electrical panels for hands-free operation. 120 volt AC. Receiver operates from one 9 volt battery. UL Listed.
Measures AC current and voltage, DC voltage and resistance. LockJaw feature enables jaw to open only when positioned in correct setting. Data hold feature retains values. Spare fuse included. SPECIFICATIONS: AC voltage-600, DC voltage-60, AC amp-600, Ohms 1M, Fuse-500mA, Total Ranges-8.