For use with cable ready TV's, VCR's and outdoor antennas. For use with 75 ohm cable. Self-extinguishing, high impact thermoplastic meets UL 94V-O flame retardancy rating. Mounting and assembly hardware included.

For use with cable ready TV's, VCR's and outdoor antennas. For use with 75 ohm cable. Self-extinguishing, high impact thermoplastic meets UL 94V-O flame retardancy rating. Mounting and assembly hardware included.

Connects to RG6 coax cable. Crimping tool required. .87" height x .5" width x .5" depth.

Connects two coaxial cables. .75" height x .5" width x .5" depth.

Secures RG-59, RG-6 coaxial. Combo screw for safer installs. Screw-in depth of 1/2".

Connects to coax cable without tools. .75" height x .5" width x .5" depth.

Allows coax cable to feed through wall an internal or external wall. 1.17" height x 1.17" width x 1.17" depth.

Allows quick connect and disconnect of coax cable. .87" height x .5" width x .5" depth.

For use in hard to reach spaces. Repositions cable jack for easy access. Plug and play. .87" height x .67" width x .37" depth.

Gold plated, 75 ohm, 1000Hz. Splits one coax cable signal into two. 1.25" height x 2" width x 0.5" depth.

Connects two 75 ohm coax cables through a wall. 4.5" height x 2.75" width x 0.75" depth.

Manually switch between two coax input sources to one TV such as antenna or cable. 2.37" height x 2.87" width x 0.75" depth.

For use with RG-6/Quad coaxial cable. Nickel plated to resist corrosion. Requires crimping tool to use.

Connects to coax cable without tools. .75" height x .5" width x .5" depth.

Connects 75 ohm coax cable through a wall. 4.5" height x 2.75" width x 0.75" depth.

Connects 75 ohm coax cable through a wall. 4.5" height x 2.75" width x 0.75" depth.

Gold plated, 75 ohm, 1000Hz. Splits one coax cable signal into three. 1.75" height x 2.75" width x 0.5" depth.

Connects to RG6 coax cable. Crimping tool required. .87" height x .5" width x .5" depth.

Gold plated, 75 ohm, 1000Hz. Splits one coax cable signal into four. 1.75" height x 2.75" width x 0.5" depth.

Splits one coax cable signal into two. 24K gold connectors. 5-2400MHz. 2" height x 2" width x 0.75" depth.

PCB printed circuit board design, nickel plated housing. 5 MHz - 1 GHz bandwidth, 75 Ohm impedance, low insertion loss, over 120 dB of RFI shielding. Splits one signal into three.

Combine two RG-6 lengths of coaxial cable or connect cables through a wall.

Strip the cable, fold braid back and push into ITC connector.

Splits one coax cable signal into four. 24K gold connectors. Quad Shield video accessory. Four layers of premium shielding to prevent signal interference. 5-2400MHz. 2" height x 3" width x 0.75" depth.

Combines two HDMI cables to extend new or existing hookup. Adjusts up to a 90 degree angle to connect in hard to reach places. 2.25" height x .87" width x .5" depth.

Adjusts up to a 90 degree angle to connect a HDMI cable to a wall mounted HDTV or other device  in tight, hard to reach places. Meets current HDMI specifications and can support HDTV resolution. 2.25" height x .87" width x .5" depth.

Strip the cable, fold braid back and push into ITC connector.

Includes cutter, stripper, compression tool, and includes compression "F" connectors GC-330, COM-310, SE-398  and GDC-6C in a custom molded pouch with a belt clip.

For use with RG-6/Quad coaxial cable. Nickel plated to resist corrosion. Requires crimping tool to use.

For home audio/video systems including VCR, cable TV, satellite systems and connection of other TVs. Use shielded audio/video cable in a single or dual gang wallplate. Connector modules snap into QuickPort wallplates. Connections are simple without messy soldering. Gold plated for improved performance. UL listed.