Filter Air Fiberglas 14x30x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 14x14x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 12x12x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 20x20x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 16x25x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 16x20x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 15x20x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 14x25x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 14x20x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 12x24x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 10x20x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 16x24x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 12x20x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 12x30x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 15x25x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 14x24x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 16x16x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 18x30x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 18x20x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 21x21x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 18x25x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fbrgls 20x22.25x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 18x18x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 18x24x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 20x25x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 20x24x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 20x30x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 24x24x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 16x30x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Filter Air Fiberglas 25x25x1in - Case of 12
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
