Holds up to 21 hitch balls and 18 ball mounts. 1-1/4" channel for signing and pricing.

Fits most receivers. Forged from hardened steel for strong cut and shear resistance. Pins are tapered for easy installation and to help align the draw-bar into proper position.

Allows smaller shank hitch balls to be used with larger ball-mounts.

Allows smaller shank hitch balls to be used with larger ball-mounts.

Fits most receivers. Forged from hardened steel for strong cut and shear resistance. Pins are tapered for easy installation and to help align the draw-bar into proper position.

Trailer receiving/pull pin with clip. 1/2" for Nos.06, 77 and 88 series, 5/8" for 33, 35, 36, 37 and 44 series.

Trailer receiving/pull pin with clip. 1/2" for Nos.06, 77 and 88 series, 5/8" for 33, 35, 36, 37 and 44 series.

Trailer receiving/pull pin with clip. 1/2" for Nos.06, 77 and 88 series, 5/8" for 33, 35, 36, 37 and 44 series.

Fits most couplers, flat key design.

Case hardened steel shackle. Solid brass body. Precision pin tumbler mechanism resists picking. Built-in anti sawing pin protects shackle from cutting and sawing. 3/4" horizontal clearance. Each lock is keyed differently.

Includes 2 keys.

Cold-forged for superior strength. When installing, torque all 3/4" shank balls to 160 ft. lb., all 1" to 250 ft. lb. and all 1-1/4" to 450 ft. lb. Balls with longer shanks are designed for use with step bumpers. Engineered to meet all safety requirements of VESC regulation V-5.

Cold-forged for superior strength. When installing, torque all 3/4" shank balls to 160 ft. lb., all 1" to 250 ft. lb. and all 1-1/4" to 450 ft. lb. Balls with longer shanks are designed for use with step bumpers. Engineered to meet all safety requirements of VESC regulation V-5.

Cold-forged for superior strength. When installing, torque all 3/4" shank balls to 160 ft. lb., all 1" to 250 ft. lb. and all 1-1/4" to 450 ft. lb. Balls with longer shanks are designed for use with step bumpers. Engineered to meet all safety requirements of VESC regulation V-5.

Cold-forged for superior strength. When installing, torque all 3/4" shank balls to 160 ft. lb., all 1" to 250 ft. lb. and all 1-1/4" to 450 ft. lb. Balls with longer shanks are designed for use with step bumpers. Engineered to meet all safety requirements of VESC regulation V-5.

Cold-forged for superior strength. When installing, torque all 3/4" shank balls to 160 ft. lb., all 1" to 250 ft. lb. and all 1-1/4" to 450 ft. lb. Balls with longer shanks are designed for use with step bumpers. Engineered to meet all safety requirements of VESC regulation V-5.

Cold-forged for superior strength. When installing, torque all 3/4" shank balls to 160 ft. lb., all 1" to 250 ft. lb. and all 1-1/4" to 450 ft. lb. Balls with longer shanks are designed for use with step bumpers. Engineered to meet all safety requirements of VESC regulation V-5.

Fits both 1/2" (13mm) and 5/8" (16mm) receivers. Usable length of receiver pin is 3" (76mm). Push to Lock mechanism, push lock body onto pin firmly and remove key. 1/2" (13mm) pin is rated for Class I/II; 3,500 lb. load rating. 5/8" (16mm) pin is rated for Class III/IV; 10,000 lb. load rating. Weather tough seal and water tight cap protects lock from moisture and dirt. 4-pin cylinder for added pick resistance. Uses K1 key blank.

Cold-forged for superior strength. When installing, torque all 3/4" shank balls to 160 ft. lb., all 1" to 250 ft. lb. and all 1-1/4" to 450 ft. lb. Balls with longer shanks are designed for use with step bumpers. Engineered to meet all safety requirements of VESC regulation V-5.

Cold-forged for superior strength. When installing, torque all 3/4" shank balls to 160 ft. lb., all 1" to 250 ft. lb. and all 1-1/4" to 450 ft. lb. Balls with longer shanks are designed for use with step bumpers. Engineered to meet all safety requirements of VESC regulation V-5.

Fits 5/8" or 1/2" receiver pin holes. Rubber dust cap and vending machine key for durability.

Cold-forged for superior strength. When installing, torque all 3/4" shank balls to 160 ft. lb. and all 1" to 250 ft. lb. Engineered to meet all safety requirements of VESC regulation V-5. 2" ball diameter.

Cold-forged for superior strength. When installing, torque all 3/4" shank balls to 160 ft. lb., all 1" to 250 ft. lb. and all 1-1/4" to 450 ft. lb. Balls with longer shanks are designed for use with step bumpers. Engineered to meet all safety requirements of VESC regulation V-5.

Combined with interlock ball mounts, provide a one wrench tightening system. Place the hitch ball shank through the hole of the ball mount, align the hex shapes and tighten to specification. When installing, torque all 3/4" shank balls to 160 ft. lb. and all 1" to 250 ft. lb.

Combined with interlock ball mounts, provide a one wrench tightening system. Place the hitch ball shank through the hole of the ball mount, align the hex shapes and tighten to specification. When installing, torque all 3/4" shank balls to 160 ft. lb. and all 1" to 250 ft. lb.

Combined with interlock ball mounts, provide a one wrench tightening system. Place the hitch ball shank through the hole of the ball mount, align the hex shapes and tighten to specification. When installing, torque all 3/4" shank balls to 160 ft. lb. and all 1" to 250 ft. lb.

For connecting clevis with related towing products. Heat treated Grade 8 steel, soft grip handle, includes cotter pin. Black, carded.

Combined with interlock ball mounts, provide a one wrench tightening system. Place the hitch ball shank through the hole of the ball mount, align the hex shapes and tighten to specification. When installing, torque all 3/4" shank balls to 160 ft. lb. and all 1" to 250 ft. lb.

Combined with interlock ball mounts, provide a one wrench tightening system. Place the hitch ball shank through the hole of the ball mount, align the hex shapes and tighten to specification. When installing, torque all 3/4" shank balls to 160 ft. lb. and all 1" to 250 ft. lb.

Combined with interlock ball mounts, provide a one wrench tightening system. Place the hitch ball shank through the hole of the ball mount, align the hex shapes and tighten to specification. When installing, torque all 3/4" shank balls to 160 ft. lb. and all 1" to 250 ft. lb.