Low-pressure EPDM tubing for windshield washers, vacuum and emissions systems for power accessories. Similar to SAE J1037 specification. Will not deteriorate from heat, weathering or ozone. Maintains its flexibility even at low temperatures.

Mainly used for windshield wiper tubes but used for a variety of applications where low pressure is present. Bulk self-dispensing 50 ft spool.

Mainly used for windshield wiper tubes but used for a variety of applications where low pressure is present. Bulk self-dispensing 50 ft spool.

3/4 x 12 ft fuel transfer hose with internal spring guard, stainless steel ground wire and fuel-resistant neoprene exterior. Designed for gasoline, diesel, B20, E15 and kerosene. Suitable for all electric pumps.

Black non-reinforced vacuum tubing. Small diameter thermoplastic compound for a variety of uses. Designed for vacuum applications but can be used for low pressure water lines. Not for under-hood applications.

Pre-cut fuel/vapor/PVC hose.

3/4 x 20 ft fuel transfer hose with internal spring guard, stainless steel ground wire and fuel-resistant neoprene exterior. Designed for gasoline, diesel, B20, E15 and kerosene. Suitable for all electric pumps.

1 x 14 ft fuel transfer hose with internal spring guard, stainless steel ground wire and fuel-resistant neoprene exterior. Designed for gasoline, diesel, B20, E15 and kerosene. Suitable for all electric pumps.

1 x 20 ft fuel transfer hose with internal spring guard, stainless steel ground wire and fuel-resistant neoprene exterior. Designed for gasoline, diesel, B20, E15 and kerosene. Suitable for all electric pumps.

Marked every foot with a notch mark and UPC code.

Marked every foot with a notch mark and UPC code.

Fuel line/vapor emission hose is manufactured to meet the specifications for multiple types of gasoline, including those enhanced with alcohol up to 15%. The tube and cover are resistant to oil, ozone and gasoline. The inner reinforcement is a spiral synthetic cord. Rated at 40 psi.

Fuel line/vapor emission hose is manufactured to meet the specifications for multiple types of gasoline, including those enhanced with alcohol up to 15%. The tube and cover are resistant to oil, ozone and gasoline. The inner reinforcement is a spiral synthetic cord. Rated at 40 psi.

A replacement for hose on most cars and light trucks. This standard grade hose is similar to SAE20R3 for normal-duty service. Withstands the abuse of corrosive solutions and additives. Resists weathering to provide a long, trouble-free service life.

Fuel line/vapor emission hose is manufactured to meet the specifications for multiple types of gasoline, including those enhanced with alcohol up to 15%. The tube and cover are resistant to oil, ozone and gasoline. The inner reinforcement is a spiral synthetic cord. Rated at 40 psi.

Bulk self-dispensing box.

Manufactured to meet the specifications of heat and ozone resistance for under the hood temperatures. High-strength reinforcing resists coiling, system surge pressures and kinking. 40 psi.

Transparent thermoplastic tubing for small diameter gasoline and fuel line applications. Extremely flexible and resistant to weathering, ozone and abrasion. Features a wide temperature range for outdoor applications.

Made of black PVC blended compounds for use with petroleum products with reinforced polyester braiding and a cover that is oil, grease and ozone resistant. 175 psi at 70 deg F. Operating temperature range -40 to 175 deg F (79 deg C).

Made of black PVC blended compounds for use with petroleum products with reinforced polyester braiding and a cover that is oil, grease and ozone resistant. 175 psi at 70 deg F. Operating temperature range -40 to 175 deg F (79 deg C).