Soft grip barrel handle. Lock-on switch. Die-cast aluminum gear housing. 2-position assist handle. Includes 4-1/2" grinding wheel, auxiliary handle and wrench.
Metal gear case for durability and longer life, convenient slide switch for easier use, two Position side handle provides added comfort and control, spindle lock for easy accessory changes, contoured body grip for added comfort and control. Specs: 10000 RPM, spindle size 5/8"-11. Includes: metal grinding wheel, spanner wrench.
Tool less guard adjustment, heavy duty metal gear housing for added durability, compact grip design for comfort and control. Specs: 120V, 4-1/2" cut-off disc, no load RPM: 11,000. Includes: (1) metal grinding wheel, side assist handle, spanner wrench.
Cast metal gear case increases jobsite durability and tool longevity, Tool-free change guard provides fast and easy guard removal. Spindle lock feature allows for single wrench bit changes. 3-position side handle allows greater control in multiple positions. Specs: 11,000 rpm, 5/8" x 11" spindle and weighs 4.1 lbs. Includes slide switch with lock-on, side handle, grinding wheel, wrench and wheel guard.
Slim body for a secure grip, metal gear case, tool less safety guard adjustments instantly, two position auxiliary handle, slide on/off switch, spindle lock for easy disc replacement, soft grip handle. Specs: 120V/60Hz,no load speed 11000 RPM, 4-1/2" disc, disc bore 7/8", spindle thread 5/8"-11, weight 4.2 lbs. Includes 10 ft. cord, (1) auxiliary handle, (1) spanner.
Lock on/off switch for extended use applications, ServiceMinder brushes eliminates guesswork and stops the tool when preventative maintenance is required, epoxy coated field windings provides ultimate protection against abrasive dust and metal debris, 5/8"-11 spindle, spindle lock for quick wheel changes, two position auxiliary handle specifically designed and angled to a natural position, double insulated, UL listed, complies to OSHA. Specs: 120V/AC, 4-1/2" cut-off disc, max. motor HP 1, no load RPM 11,000, 5/8"-11 spindle thread, length 10-1/2", weight 3.75 lbs. Includes: guard, auxiliary handle, flange kit (inner and outer wheel flanges), spanner wrench, abrasive wheel.
Labyrinth construction seals and protects the motor and bearings from dust and debris, all ball bearing design and metal gear housing, externally accessible brushes, protective varnish seals the armature, machined bevel gears, side handle is positioned at an increased 20 degree angle for comfort and control. Specs: 120V, 4" grinding wheel, sanding disc, 3" wire cup brush, no load speed 11,000 RPM, spindle thread m10x1.25", length 10-1/2", weight 3.7 lbs. Includes: 4" grinding wheel, wheel guard, lock nut, lock nut wrench, side handle, inner flange, plastic tool case.
High performance motor produces 8,500 rpm for aggressive cutting, removal and finishing. Cast metal gear housing helps dissipate heat during extended use. Contoured over molded handle optimized for increased comfort. Spindle lock allows for quick and easy wheel changes. 3 position side handle provides control in multiple positions. Tool free guard makes guard adjustments quick and easy. 20 volt max system - high performance cordless platform. 14" length; weighs only 5 lbs. Battery And Charger Sold Separately.
Spindle lock provides easy and quick disc changes, tool rest to protect the user and prolong tool life, slide switch with a quick-off feature to shut off the tool immediately, removable side handle, carbon brush access allows user to replace brush as needed, lightweight design facilitates maneuverability. Specs: 1,010 max watts out, no-load speed 11,000 RPM, 4.5" wheel diameter, slide switch, spindle thread M10 x 1-1/4, spindle lock, sealed switch, length 10". Includes: wrench, side handle, 5 depressed center wheel, plastic carrying case.
Compact and light grinder features debris baffle which protects internal components, multi-port exhaust reduces motor burn-up, tool free and burst resistant guard. Specs: wheel diameter 4-1/2", slide switch, max watts out (power) 750, speed rpm 11000, 120V (AC only), epoxy motor protection, double insulated 8' cord, spindle thread 5/8-11", easy actuation spindle lock, length 10.25", weight 3.5 lb. Includes: grinder, 4-1/2" type 27 grinding wheel, type 27 guard, spanner wrench.
For sharpening, grinding, rust removal and surface preparation. Metal gear case adds durability and extends the life of the tool. 7 amp motor for fast, efficient grinding. Trigger switch allows for ease of use when wearing gloves. Extended handle with rubber grips for added comfort and control. 3 position side handle adds comfort and control in a variety of applications. Spindle lock. Easy accessory changes. 1,000 rpm. Spindle size: 5/8''-11''. Includes: 4-1/2'' small grinder, (1) metal grinding wheel, (1) spanner wrench and (1) side handle.
Rotatable gear housing can be positioned every 90 degrees for cutting applications, grinder has externally accessible brushes, protective varnish seals the motor from contaminants and reduces heat, all ball bearing design and metal gear housing , machined bevel gears. Specs: 11,000 no load RPM, 5/8" x 11 spindle thread (UNC), 10-1/2" x 5" x 4-1/16" overall length, weight 3.1 lbs. Includes: 4-1/2" grinding wheel, sanding disc, 3-1/2" wire cup brush , wheel guard, lock nut, lock nut wrench, side handle, inner flange.
All ball bearing design and metal gear housing, rotatable gear housing can be positioned every 90 degrees, lock-on/off feature, AC/DC switch for use with alternative power source, protective varnish seals the armature from dust and debris, extra large paddle switch, thicker coil wires are wound more closely to reduce heat and energy loss. Specs: 120V, grinding wheel, sanding disc - 4-1/2", wire cup brush 3-1/2", no load speed 10,000 RPM, 5/8"x11 UNC spindle thread, length 10-5/8", weight 4.5 lbs. Includes: 4-1/2" grinding wheel, wheel guard, lock nut, lock nut wrench, side handle, inner flange.
Powerful 7.5 amp motor delivers 11,000 rpm for high output power. Small diameter barrel grip (only 2-1/2") for added comfort. Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life. Extra large paddle switch for comfortable operation. Thicker coil wires are wound more closely to reduce heat and energy loss. All-ball bearing design and metal gear housing for durability. Rotatable gear housing can be positioned every 90?. Includes: (1) 4-1/2" Diamond Blade, Turbo, General Purpose (A-94552), (5) 4-1/2" Grinding Wheels (A-95956), (1) 4-1/2" Wheel Guard (125273-5), (1) 4-1/2" Cut-Off Wheel Guard (135103-2), (1) Lock Nut (193465-4), (1) Lock Nut (193465-4), (1) Lock Nut Wrench (782422-3), (1) Side Handle (153489-2), (1) Inner Flange (224399-1) and (1) Case.
All ball bearing design and metal gear housing, rotatable gear housing can be positioned every 90 degrees, lock-on/off feature, AC/DC switch for use with alternative power source, protective varnish seals the armature from dust and debris, extra large paddle switch, thicker coil wires are wound more closely to reduce heat and energy loss. Specs: 120V, grinding wheel, sanding disc - 4-1/2", wire cup brush 3-1/2", no load speed 10,000 RPM, 5/8"x11 UNC spindle thread, lock-on/lock-off, length 10-3/4", weight 4.5 lbs. Includes: 4-1/2" grinding wheel, wheel guard, lock nut, lock nut wrench, side handle, inner flange.
11 amp AC/DC 11,000 rpm motor provides the ideal weight/size ratio available. Dust ejection system provides durability by ejecting damaging dust and debris particles that enter the tool. Oversized brushes provide long brush life. Large spiral bevel gear provides long transmission life. One-Touch guard allows for 360 degree rotation of the guard with a single action. Quick-change wheel release allows tool free wheel removal without the need for a wrench. Top mounted and protected spindle lock button maximizes depth of cut without compromising durability. Uniquely small gripping surface in this power class allows for ideal comfort. Newly designed side handle provides excellent ergonomics while oversized threading provides durability. Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage. Paddle switch with safety lock-off prevents accidental start up. Matching wheel flanges allow the use of common accessories. Lightweight at only 4.6 lbs. Tool length: 12". Spindle thread: 5/8"-11. Angle grinder includes: 2-position side handle and 4-1/2" One-Touch (T27) guard.
Dust ejection system through the air intake vents, low profile, one-piece brush arm, QuickChange wheel release allows wheel removal without need for a wrench, keyless adjustable guard, vibration reducing side handle, auto off brushes shut the tool down when the brushes need replacing to avoid tool damage, oversized, protected spindle lock button, paddle switch with safety lock-off prevents accidental start up, matching wheel flanges. Specs: max watts out 1,200W, HP 1.6hp, no load speed 11,000 RPM, use wheels RPM above 11,000 RPM, spindle thread 5/8"-11, paddle switch w/lock-on, dust ejection system, tool-free flange system, length 11-1/4", weight 4.6 lbs. Includes: two position side handle, depressed center wheel, keyless adjustable guard, wrench, kit box.
Trigger grip handle provides better control, debris baffles protect internal components by deflecting damaging debris out of the airflow at the intake vents, soft grip three position handle provides optimal control during various applications, external brush doors reduces service time by providing easy access to brushes, tool free, burst resistant guard quickly adjusts the guard without a tool. Specs: 120V (AC only), 4-1/2" wheel diameter, max. watts out (power) 1,250 MWO, load RPM 10,000, debris baffles, multi-port exhaust, tool free guard, gears spiral bevel, epoxy motor protection, multi-port exhaust system, burst resistant guard, 8', 2-wire cord, double insulated, 5/8"-11 spindle thread, weight 5.5 lbs. Includes: side handle, type 27 guard, spanner wrench, flanges.
Motor overload protection, epoxy protection extends motor life by protecting the copper wire from abrasion, debris baffles protect internal components by deflecting damaging debris out of the airflow, multi port exhaust reduces motor burn up by efficiently venting hot air out of the grinder, extra large paddle switch, tool free, burst resistant guard. Specs: 120V (AC only), 4-1/2" wheel diameter, speed (RPM) 10,000, slide switch, 5/8"-11 spindle thread size, spindle lock, side handle, 8' cord, max watts out (Power): 825 MWO, double insulated, easy actuation spindle lock, 8' 2-wire cord, Length 11.8", weight 5.0 lbs. Includes: (1) slide handle, (1) type 27 guard, (1) spanner wrench, (1) Flange.
Highest overload durability with an improved cooling mechanism, improved dust protection resists wear on the armature and field coils, on/off switch mounted on the top, one touch quick off mechanism, Easy to manipulate spindle lock located at the front of the grinder, side handle projects forward 70 degrees and can be attached to the right or left. Specs: 4-1/2" wheel diameter, 5/8" x 11 spindle, power source AC/DC, power input 910 W, max output 1,900 W, no load RPM 10,000, length 11-9/64", weight 4.2 lbs. Includes: spanner wrench, side handle, depressed center wheel.
4 -pole motor delivers maximum power when cutting or grinding. Overload protection prevents damage to the tool and battery in abusive situations. Debris baffles L-shape vents keep debris from entering the tool and damaging internal components to help increase tool life. Tool free, burst resistant guard allows for quick, easy guard adjustments. 3-position side handle provides optimal control and versatility. Includes: (1) M18 Cordless Lithium-Ion 4-1/2" cut off grinder and (1) side handle.
For cutting and grinding applications. Spec: quick-change wheel, tool free guard, 2-finger trigger switch with lock-off button, 2-position side handle, 6,500 rpm, spindle lock, 5/8" spindle thread, and weighs 5.1 lbs. Uses wheels above 10,000 rpm. Includes tool only with spanner wrench, type 1 (cutting) guard and 2-position side handle. Uses 20V MAX Lithium Ion. Battery not included.
This Angle Grinder with Paddle Switch is a beefy angle grinder that provides a no-lock multi-grip paddle switch for user control and comfort. Delivers 13 amps and up to 11,500 rpm of professional power. Variable speed setting of 2,800 rpm, allowing the user to match speed to application. The paddle switch provides additional operator control. The tool is designed for long life, featuring directed air flow that diverts dust away from vital components. Equipped with a two position Vibration Control side handle, making it less strenuous to operate. Constant electronics for easy starts and dependable speed under load, and it has direct motor cooling for higher overload capabilities. Provides security, with integrated acceleration sensor to limit inadvertent recoil and restart protection to protect against unintended startup. Burst-protection quick tool-less adjustable guard and a large spindle lock for a more convenient disc change. The Service Minder brushes stop the grinder when preventative maintenance is required.
Lightweight, lock-on button for continuous use operation, side handle can be installed on either side of the tool, ball bearing construction for long tool life, spindle lock for easy wheel changes, AC/DC for use with alternative power source, standard 5/8?x 11 UNC spindle, double insulated. Specs: 115V, 5" grinding wheel, 3-1/2" wire cup brush, 5" sanding disc, no load speed 10,000 RPM , 5/8" x 11 UNC, spindle thread, lock-on, length 14", weight 6.6 lbs. Includes: (1) grinding wheel, wheel guard, side handle, inner flange, lock nut, lock nut wrench, spindle washer.
Super joint system helps prevent gear damage caused by accidental wheel binding. Variable speed control dial enables user to match the speed to the application. Powerful 12.0 amp motor for increased output power in a more compact tool. Soft start feature for smooth start-ups. Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life. Electronic speed control maintains constant speed under load. Larger and improved carbon brush material for longer tool life. Tool-less wheel guard adjustment for easy clamping.3-1/2" wire cup brush, 4-1/2" sanding disc. No load speed 2,800-10,500 rpm. 5/8" x 11 UNC spindle thread. Dimensions: 11-3/4"L x 5-1/15"W x 4". Weighs only 5.3 lbs.
High power 8,500 rpm motor with overload protection provides higher operating speeds under load. Epoxy coated field armature provides long service life against abrasion from airborne debris. Low profile gear case allows for work in tight areas. Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage. Side handle provides improved ergonomics for specific applications. Brush window allows for quick brush replacement. Specs: 3,000 Watts, 4 HP. Includes: 7" guard and 2 position side handle.
Debris baffles protects internal components, external brush doors reduces service time by providing easy access to brushes, soft grip main handle, burst resistant guard, adjust the guard without a tool, 7" and 9" type 27 guard included for added productivity. Specs: 120V (AC/DC), wheel diameter 7?/9?, trigger w/ lock-on, max watts out (power) 3,130, no load RPM 6,000 , multi-port exhaust, tool free guard, 4.2 HP max horse power, use wheels RPM above 6,600, gears spiral bevel, epoxy motor protection, multi-port exhaust system, spindle thread 5/8"-11 , double insulated, 8' 2-wire cord, easy actuation spindle lock, length 21", weight 13.7 lbs. Includes: grinder, side handle, 7" & 9" type 27 guards, spanner wrench, flanges.
4-1/2" - 6" (115mm-150mm) Grinder with KicBack brake is maximized for power and durability. It delivers 13 amps of power with the portability and convenience of cordless through Dewalt's revolutionary FlexVolt technology. The rake engages when the trigger is released, stopping speeds of 1.5 seconds with standard grinding wheel (4-1/2" x 1/4" Bonded abrasive wheel, non-hubbed). KicBack brake engages when a pinch, stall or even bind up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder and shut the grinder off. E-Clutch activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor. 9,000 rpm speed allows the use of up to 6" wheels for both cutting and grinding applications. Includes: Grinder, side handle, 4-1/2" (115mm) Type 27 wheel, 4-1/2" (115mm) Type 27 guard, 6" (150mm) Type 27 guard, wrench and flanges. Battery Not Included.
Variable electronic speed, slender double-neck die cast aluminum gear housing, Internal labyrinth construction, speed control dial, SJS (Super Joint System) absorbs shocks, wheel lock. Specs: collet 1/8" - 1/4". no load speed 7,000 - 28,000 RPM. 115V, overall length 14-5/8". Includes: 1/4" collet cone , side handle, wrench #13 , wrench #19.