High speed steel used to drill most ferrous and nonferrous metals; 135 degree split point eliminates need for center punch and keeps drill from skating on hard surfaces. All sizes 3/16" and larger have 3 flats on the shank so the drill chuck gets a better grip on the drill bit. All sizes 13/32" and above have a 3/8" reduced shank. Jobbers length. Suitable for clipstrips or dump bins. Includes one each: 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", and pouch.

For most DIY projects. For drilling in wood, metal or plastic. Set contains bits ranging from 1/16" to 1/4". Includes bit bar.

High speed steel bits allows you to tackle almost any DIY project in wood, metal or plastic. Set contains the most popular range of drill bits stored in a handy bit bar that goes in any toolbox, pocket or kitchen drawer. Includes (1) one each: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", and 1/4".

High speed steel for drilling most ferrous and nonferrous metals; 135 degree split point eliminates need for center punch and keeps drill from skating on hard surfaces. All sizes 3/16" and larger have 3 flats on the shank so the drill chuck gets a better grip on the drill bit. All sizes 13/32" and above have a 3/8" reduced shank. Jobbers length; space efficient case with pilfer proof tab. Includes (1) one  each: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64" and 1/4".

Bits are constructed of M-2 high speed steel for strength, heat resistance, and wear resistance; 3/8" reduced shank fits all 3/8" drills. Three-flatted shank provides better chuck grip and reduces slippage. Includes: 1/16", 3/32", 1/8", 5/32", 1/4", 7/32", 3/16" and case.

High speed steel for drilling in wood, metal or plastic. Handy bit bar that makes storing this set in any toolbox, pocket or kitchen drawer easy and organized. Includes (2) two each:  1/16", 5/64" 3/32", 7/64". Includes (1) one each: 1/8", 9/64", 5/32", 11/64", 3/16", 1/4", 7/32", 5/16", 3/8" and plastic case.

For drilling in wood, metal and plastic. Assorted sizes 1/16" to 1/4", with bonus 1/2" bit included. It is organized by a bit bar for storing in toolbox, pocket or kitchen drawer.

High speed steel with black and gold finish for added corrosion resistance.TURBOMAX tip eliminates "walking", starts faster and stays sharp longer. 3-flatted shank provides secure grip on chuck. Precision-ground for hole size accuracy. Includes bits: 1/16" - 3/8" in a case.

135 degree split point design reduces slip and walking and allows for easier no slip starting. No spin shanks. Black oxide finish for greater wear protection. Parabolic flute design for greater bit strength. Includes touch case container to keep bits organized. Sliding soft grip lock keeps case closed securely. These bits are ideal for drilling in metal, wood, and plastics. Set contains bits ranging from 1/16'' to 1/4''.

Bits are constructed of M-2 high speed steel for strength, heat  and wear resistance. Standard 118 degree point for use in wood, metal, and plastic. Includes: 1/16" through 1/4" in 1/64" increments in a metal index case.

Bit sizes 61-80 for precision drilling of wood, plastic and metal. Includes convenient steel index storage case. Max rpm: 30,000

Set includes HSS drills: 1/16" (2), 5/64", 3/32", 7/64", 1/8" (2), 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4'', 5/16'',  3/8" and plastic case with rubberized grip panels.

High speed steel for drilling most ferrous and nonferrous metals. The 135 degree split point eliminates need for center punch and keeps drill from skating on hard surfaces. All sizes 3/16" and larger have 3 flats on the shank for a better grip on the drill bit. All sizes 13/32" and above have a 3/8" reduced shank. Includes (1) one each: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32",11/64", 3/16", 13/64", 7/32" and 1/4" and (1) one each masonry bits: 1/8", 3/16", 1/4", 5/16", 3/8", and plastic case with rubberized grip panels.

Pilot point tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough. No Spin shank eliminates the frustration of bit spinning in the chuck. Tapered web provides greater durability to reduce breaking. Size markings are located above the shank to prevent wearing away. Includes: (2) 1/16" split point drill bit, (1) 5/64" split point drill bit, (1) 3/32" split point drill bit, (1) 7/64" split point drill bit, (2) 1/8" split point drill bit, (1) 9/64" split point drill bit, (1) 5/32" split point drill bit,  (1) 3/16" pilot point drill bit, (1) 7/32" pilot point  drill bit,  (1) 1/4" pilot point  drill bit, (1); 5/16" pilot point drill bit, (1) 3/8" pilot point drill bit and plastic case.

Universal drilling applications designed for contractors, electricians and other pros who need solid, reliable bits for general application drilling in wood, plastic and light gauge metal. The split-point tip has been engineered for no-skate starts and clean, accurate holes. The bit provides longer life than standard drill bit, thanks to the tip design and black oxide coating. The three-flank shank design on bits 3/16" and larger promotes better gripping and guards against slipping. High visibility marking provide clearly marked diameter. Includes: (1) 1/16", (1) 5/64", (1) 3/32", (1) 7/64", (2) 1/8", (1) 9/64", (1) 5/32", (1) 3/16", (1) 7/32", (1) 1/4", (1) 5/16", (1) 3/8", (1) 1/2" and a convenient plastic case.

Black oxide bits provide longer life and faster drill times, parabolic flute, clears chips faster, 135 degree split point, precision start no walking, 3-flat secure grip shank, reduces bit slipping in chuck and a reduced shank diameter for use in 3/8" chucks. Set includes: (1) 1/16", (1) 5/64", (1) 3/32", (1) 7/64", (1) 1/8", (1) 9/64", (1) 5/32", (1) 11/64", (1) 3/16", (1) 13/64", (1) 7/32", (1) 1/4", (1) 9/32", (1) 5/16", (1) 3/8" and a plastic case.

Pilot point tip starts on contact for clean and accurate holes in general purpose applications of metal and wood. Reduces lock up on breakthrough and no spin shank eliminates bit spinning in chuck. Tapered web for greater durability to reduce breaking. Size markings located above shank to prevent wearing away. Includes (2) two each: 1/16" and (1) each: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 1/4", 5/16", 3/8" 1/2" and plastic case.

Black oxide finish for greater wear protection and longevity of the bits. 135 degree split-point design reduces slip and walking and allows for easier no-slip starting. These bits are ideal for drilling in metal, wood, and plastics. Set includes bit sizes ranging from 1/16" up to 1/2" and a sturdy tough case with a sliding soft-grip lock.

Constructed of M-2 high speed steel, turbo point tips with three-flatted shank for better chuck grip and reduced slippage. Used in keyless chucks. Set includes 1 each: 1/16, 3/32, 7/8, 5/32, 3/16, 7/32, 1/4, 5/64, 7/64, 9/64, 11/64, 13/64, 15/64.

Black oxide coating for corrosion resistance and 135 degree split point which minimizes bit walk. Includes one (1) each: 5/64", 7/64", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", and 3/8", (2) two each: 1/16", 3/32", 1/8" and rubber-sided case with sliding latch for added security.

Black oxide for extreme durability and long life, each bit has parabolic flute, 135 degree split point, precision start no walking, 3 flat secure grip shank, clears chips faster and reduces bit slipping in chuck. Jobber length. Includes (2) 1/16", (2) 5/64", (1) 3/32", (1) 7/64", (2) 1/8", (1) 9/64", (1) 5/32", (1) 11/64", (2) 3/16", (1) 13/64", (1) 7/32", (1) 15/64", (2) 1/4", (1) 5/16", (1) 3/8", (1) 1/2" and case.

Each bit is manufactured to exacting specifications and features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Offers durability, speed and selection to support general purpose applications.

High speed steel bits used for drilling in metal, wood and plastic. Includes: bits from 1/16" - 1/2" and case.

Cutting edge stays sharper longer and tin coating reduces friction in applications such as repetitive metal drilling with portable or stationary drill presses; 140 degree split point for less walking and quicker starts. Straight shank. Includes: drill bits, 1/16" through 3/8" with storage case (sliding latch design for security).

High speed steel for drilling most ferrous and nonferrous metals. The 135 degree split point eliminates need for center punch and keeps drill from skating on hard surfaces. All sizes 3/16" and larger have 3 flats on the shank for a better grip on the drill bit. All sizes 13/32" and above have a 3/8" reduced shank. Includes (1) one each: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8" and metal case with pilfer proof tab.

Made of M-2 high speed steel for strength, heat and wear resistance. Standard 118 degree point used in applications such as wood, metal and plastic. Includes bit sizes: 1/16" through 3/8" in 1/64" increments and metal index case.

High speed steel for drilling most ferrous and nonferrous metals. All sizes 3/16" and larger have 3 flats on the shank for a better grip on the drill bit; all sizes 13/32" and above have a 3/8" reduced shank. The  135 degree split point eliminates need for center punch and keeps drill from skating on hard surfaces. Includes (1) one each: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", ,29/64", 15/32", 31/64", 1/2" and metal case with pilfer proof tab.

High speed steel for use in metal, wood and plastic in applications such as automotive, MRO, stationary drill press; 118 degree conventional point with bright finish. Jobber length. Includes: bits range from 1/16" through 1/2" by 32nds, metal index for safe storage.

Pilot point tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough, no spin shank eliminates bit spinning in the chuck and tapered web to reduce breaking. Size markings are located above the shank to prevent wearing away. Includes (1) one each: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2" and case.

Designed for extreme durability and long life. Thicker core provides ultimate strength and protects against side load breakage. Parabolic flute form clears chips and debris fast to keep the bit cool. A precision start, 135 degree split point tip starts on contact to keep the bit from walking for fast accurate holes.  Thunderbolt black oxide drill bit set contains: (1)11-32", (1) 1-16", (1) 11-64", (1) 1-2", (1) 13-32", (1) 13-64", (1) 1-4", (1) 15-32", (1) 15-64", (1) 17-64", (1) 1-8", (1) 19-64", (1) 21-64", (1) 23-64", (1) 25-64", (1) 27-64", (1)29-64", (1) 3-16", (1) 31-64", (1)3-32", (1) 3-8", (1) 5-16", (1)5-32", (1) 5-64", (1) 7-16", (1) 7-32", (1)7-64", (1)9-32" and (1) 9-64".