With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage.

High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and cast iron. Can also be used in hammer drills.

High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and cast iron. Can also be used in hammer drills.

With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage.

With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage.

Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes.

With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage.

High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and cast iron. Can also be used in hammer drills.

Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes.

High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and cast iron. Can also be used in hammer drills.

With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage.

For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble.

For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble.

High speed steel with four facet diamond ground carbide tip, for use with corded or cordless drills in multi material applications such as brick, block, ceramic tile, marble, wood, dry wall, gypsum board, limestone, slate, plastics/reinforced plastics, sheet metal, and cast iron. Can also be used in hammer drills.

Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes.

For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.

For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.

For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.

With a carbide split-point and aggressive flute angles for faster drilling speed. Dewalt multi-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage.

For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble.

For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.

For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble.

For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.

For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.

Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes.

Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes.

For use in cordless and corded drills. For use to drill into brick, tile, block, wood, metal, plastic and marble.

For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.

For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable, and able to withstand drilling temperatures up to 2,000 degrees Fahrenheit; no center punch needed. Use  with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.

Upgraded multi-grind heads deliver up to 85 percent faster drilling in metal that standard bits. Hex shanks and impact rated allows user in impact drivers and hammer drill/drivers for added versatility. Sharp ground cutting edges designed for advanced performance. Steep flutes with ribs deliver fast material removal in multiple materials. Multi-application design offers drilling in masonry, brick, block, tile, metal, wood and plastic. Long life construction provides longer life than standard bits. No skate tip design allows for cleaner holes.